20 Most Recent Gateway FPD2275W LCD Monitor - Page 2 Questions & Answers

Most monitors have buttons on them (maybe on the bottom) that allow for these types of changes.

You need to adjust that through the on screen menu that handles how long the PC will allow the picture to be displayed. Depending on what version of Windows, if you right click the mouse on the desktop, you should be able to access screen options that allow you to tell the PC how long the monitor should stay on, or when to turnoff/hibernate, etc.

Hello Shan,The W2252tq uses the AIP-0165 power supply board that is also used in the L227Wtg series LG series monitor. This board is known to have issues with the filter capacitors going out. When they go out it causes the monitor to not power up just lie you have. Here is a picture of the power supply board in the unit and below is a link to a repair guide for the L227Wtg, since it has the same power supply the repair guide for the board will be the same.Here is the repair guide.http://www.ccl-la.com/blog/index.php/repairing-a-lg-l227wtg-pf-22-monitor-no-power/

See video modes, page 22 in manual downloadable here... http://www.manualslib.com/manual/56610/Gateway-Fpd2275w.html

You didn't mention what operating system you have. You can check out the drivers here for the LP2207: http://www.driverplatform.com/file_lp2207-monitor.html Additionally, you can get a lp2201 manual here: http://static.highspeedbackbone.net/pdf/Gateway_HD2201_Manual.pdf

Hi!

The problem is not the setting on your monitor...The problem is the backlight inverter located inside the upper and lower edge of your screen..
It is busted. The backlight inverter is the light source responsible for the displaying image on your screen. If these were busted.. then the only thing you will see is black screen.

It is very risky for you to replace it by yourself if you don't have the knowledge and the right tools to open the back of your lcd..My suggestion is to bring your monitor to a credible technician to have your backlight inverter replace. if there is warranty for your lcd, please avail this.

Hope it help..

Much appreciated if you rate this solution..thanks..

Check connections. Separate wiring. touching wires creates cross-talk of signals.

Monitor has blown capacitors internally on the power board I can fix these let me know what you would like to do.

it think maybe you're infected with virus, or your monitor itself have problem.try to contact an expert technician of monitor.

try going to www.cnet.com and go to the download section, search on a program called slimdrivers.

please link me to find driver for my video controller.its instant id is :-PCI\VEN_8086&DEV_2562&SUBSYS_25621849&REV_03\3&13C0B0C5&0&10