20 Most Recent
Raymarine ST60 A22012-P GPS Receiver - Page 4 Questions & Answers
Trying to change the channel
There is no international or local frequency - the frequencies are determined by international standards. But there are 2 sets of them: A - for ship stations; and B - for ground stations. Your radio is strictly a ship station one - it can't operate the 77B channel for ground stations.
But your station has an Local/DX capability - meaning that it can be set to ignore distant stations . This is done by reducing the sensitivity of the receiver. Switching between them is done directly in the Menu -pres the CALL/MENU button to enter it, it's the second entry in there. If you really need to pick up very distant stations you will have to upgrade the antenna to a Yagi one.
Ihave aproblem with a435i gps unit, the other week
On Sat 21 Nov I disconnected the unit and checked to make sure no pins had snapped off inside the connection port, I then connected the unit to a spare power cable in the garage(it has an in-line fuse and ac adaptor fitted), powered on the unit then scrolled thru the various menus powered off unplugged the unit, then re-connected it back in the boat and went for a cruise up the local river yesterday Sun 22 Nov and the unit worked fine, so my guess is a good as anyone's as to how it was fixed, most electrical appliances have gremlins of some kind, could have been low power from the old battery(replaced it), I definately checked and re-checked the connection though, mine are covered in vicks vapour rub (a suggestion from Navcom - local dealer for raymarine).cheers and many thanks
My Raychart won't take a fix. I've been advised
Maybe you backup batterie inside you plotter is low If yor plotter shows you that you are somewhere in Afrika on the atlantikcoast you have to change only the battery inside the plotter it kost few euro.
The next possibility is that you have problems with you extern gps antena look after broken kable or try it with another Gps antena
GPS Rc400 Error code 0x4001
Hi
Thanks for using FixYa. This error is due to Corrupted software of your Raymarine GPS RC 400 Device, you'll need to upgrade the software for your device by following the steps, visit this link for detailed instructions--
Raymarine GPS RC 400 software upgrade
Please do accept the solution if the issue is resolved or else revert for further assistance.
Thanks
Rylee
I have a Raymarine C80
Sounds like you may have a loose or stretched internal wire or possibly loose solder joint. Has the system been updated or upgraded lately?
Not finding what you are looking for?