20 Most Recent
Questions & Answers
Wind instruments only display 3 dashs .we refitted
Seeing as how you only performed ONE refit, it SHOULD be easy to trace the problem. I'm thinking the ground is faulty as the unit seems to have power to it judging from the three dashes visible that you mention.
Hopefully it WON'T be the connection at the top of the mast, but you know Murphy's Law.
Hope this is of help to you.
on May 01, 2010
St60 wind instrument
You might want to double check that all of the spade connectors that are used to plug the wind transducer into the ST60 wind display are firmly plugged onto the display's terminals.
Because of the blind connection, sometimes the terminal ends up lodged between the red insulator and the spade, rather than within the spade connector itself. This results in intermittent or missing readings from one part of the sensor or more.
Also make sure the display is in Master mode. You will need to get into its setup mode to confirm this. The other possible mode is repeater, which would be used if this were a secondary readout.
on Aug 22, 2008
Not finding what you are looking for?