20 Most Recent Philips TV Tuner Video Capture PCI Card - Phillips Digital (652101138177) - Page 7 Questions & Answers

Hello provmobile,

Please check this out,

http://www.bioticaindia.com/fm1236.html

Hope this helps.

HI,,

SEE WHETHER CAMCODER AV OUT PIN IS CONNECTED TO PROPER PIN OF CARD...


TNKS

RABBANEES

Cant help you with serial number, you need to supply the model number.
If not, u can try easier ways if you currently have the device installed, by downloading SiSoftware or Drivermagic.

Replace the TV. It will cost as much, if not more than a new TV, to replace the screen.

IM GUESSING ITS A LAPTOP SCREEN OR COMPUTER IT COULD BE SOME WATER TRAPPED INSIDE OF THE SCREEN LIKE CONDENSATION WHICH COULD MAKE A PRISM OF LIGHT LIKE WHEN YOU SEE A RAINBOW BECAUSE ITS SUNNY AND RAINING

Yes all the image disappear

If it has not worked since the repair you should return it to the repairer under his warranty.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Call a pro in to access your problem as you didnt leave enough info.. model and make of all you have and how is it all connected?

Hello

I am a student, so like everyone we dont have money to buy a new tv and if there is an sollution for this problem we always want the cheapest one.

Well, i came up with one. At the back of the tv there are several air vents, so what happens, is that the heating coil of the tv does not heat up enough to start the tv. What you must do is take a hair dryer and set it to the heating option. Blow the tv at the back throug al the vents for about 30 to 60 seconds and try to put it on. I promise you this will work!
Please rate this sollution.

Best regards

try to find the defective capacitor at the power supply going to fly back transformer if all capacitor is okey try to rejuvenate the tube.

I have a manual for Philips Maganvox URC, if you would like a copy of email me at [email protected]

Download intervideo windvr and your problems are over!

go to the respective company website and you will be able to find a free driver download. If you are looking for a driver for windows 7 64 bit, then it is difficult.. Because i am also looking for one..

hello, you can download driver from here

http://www.bioticaindia.com/saa7131e-03-g.html

Good luck

you get wire with xbox put them in the right holes

Hi

Yes,

It is possible.

Thanks.

Your screen may need degaussing. The symptoms are colored blotches, usually around the edges of the screen. This is caused by magnetism in the screen itself . If this is the case a repair person can use a tool called a degaussing wand to remove the magnetism and fix the picture. Some TVs have the ability to do this themselves, it depends on the brand and model