20 Most Recent HP Bestec ATX-250-12ZD 250w HP Pavillion Zinfandel Power Supply Part 5187-1098 (ATX25012ZD) Power Supply Questions & Answers

0helpful
1answer

Power will not stay on

Hi,
PSUs don't last forever, 3 / 4 years they are dead or going.
use a digital muti-metre to test the Molex connections
should be 12volts, 5volts, and 3.5 volts for motherboard conns.

or with E.S.D. kit Replace the PSU, very quick and easy job.

15 minute job.

http://www.rapidonline.com/Tools-Fasteners-Production-Equipment/Service-Aids/Antistatic-Products/ESD-field-service-kit/72665


http://www.amazon.com/300watt-Long-Computer-Power-Supply/dp/B00006B8DG

Hope this helps
Regards
Richard.
9/20/2014 11:02:16 PM • HP Bestec... • Answered on Sep 20, 2014
0helpful
1answer

Power supply light flashing green

Most computer testing facilities will test your current power supply for free. A replacement is very inexpensive to replace. Bestbuy, MicroCenter, small computer shops and buy replacemnent from Amazon.com, newegg.com.. Just make sure you have the correct information for your replacement. The model number on the power supply would be your best bet in most cases. Good luck and have a great day. I buy power supplies as low as $15 dollars Generic If you need further help, I’m available over the phone at https://www.6ya.com/expert/william_02fc2766c1e13b73
5/13/2014 5:22:22 PM • HP Bestec... • Answered on May 13, 2014
0helpful
1answer

PC fails to power up

The power supply is very inexpensive and can most likely be bought from any of your computer retailers, Amazon - Just make sure to confirm the right model type of power supply. BEST to have it tested before replacing it. To make sure that is the issue.. Many computer shops will test for free. If you need further help, I’m available over the phone at https://www.6ya.com/expert/william_02fc2766c1e13b73
5/13/2014 4:44:26 PM • HP Bestec... • Answered on May 13, 2014
0helpful
1answer

Connect power supply to mother board

It helps to remove the motherboard to go on power supply connector, and then turns it back on the system board
3/17/2014 11:04:50 PM • HP Bestec... • Answered on Mar 17, 2014
0helpful
1answer

What would cause monitor to show white screen when pc is booted up?

Will the monitor go into it's own config screen ? If not, it could be defective. You said it displayed a white screen so it is not likely that the brightness control is turned way down.Check that the monitor is connected correctly to the system. Try another monitor that is known to be good. Does the monitor work on another system, say a laptop or another desktop?Windows will boot up without a monitor and if you are running any servers on it, you can try to connect over your LAN. If the computer takes it's IP address from a local router, you can check the router status screens to see if the address is in use. That would prove Windows is running and that the monitor could be the problem.Used monitors are not expensive these days so they are easy to replace. You should have multiple monitors anyway. This is the 21st century, not the twentieth when screen size revealed your pay grade in the organization.
9/23/2012 2:46:02 AM • HP Bestec... • Answered on Sep 23, 2012
0helpful
2answers

Power light on computer flashes..tried

If you didn't accidentally unplug the four pin connector near the CPU, you need to replace the power supply. This is actually a fairly common occurrence with the cheap ATX power supplies being tossed into systems these days.
8/11/2012 6:51:16 PM • HP Bestec... • Answered on Aug 11, 2012
0helpful
1answer

The power supply cant perform the computer

If your referring to the lack of power. A 250 watts power supply is relatively old compared to the new power supplys on the market today. With technology booming these days more and more demand for power on desktops is needed to run more devices. An upgrade in power supply is fairly inexpensive these days and very easy to change. You can find one at any local electronics store. My suggestion would be to order online and get a much better price. Cost should be from the ranger of around 24.00 and up depending on where you buy and what manufacturer.I would suggest a minimum of 500 watts. Good luck to you and thanks for visiting FixYa.com.



Sincerely,
TechGuy21
7/5/2011 10:19:54 AM • HP Bestec... • Answered on Jul 05, 2011
0helpful
1answer

My bestec power supply for hp a706n pavilion, is

FroooSee your bios /setup/, maybe in there alarm on, if on change to of.
5/31/2011 6:49:36 PM • HP Bestec... • Answered on May 31, 2011
0helpful
1answer

I bought a HP 6710f

Presuming you mean the Earthwatts 500:
Should work, though the Earthwatts has the 24 pin ATX instead of the 20-pin.
http://www.atxpowersupplies.com/manuals/Antec-Earthwatts-EA-500D-user-manual.pdf
You just need to snap the 24-pin connector apart to make it work as a 20-pin. It can be snapped back together for future motherboards.
The Bestec is just a standard ATX power supply
3/24/2011 1:26:33 AM • HP Bestec... • Answered on Mar 24, 2011
0helpful
1answer

Bestec ATX-250-12Z when power lead plugged into

Hi;
you should check the capacitor in the secondry side of the power supply,
10/30/2010 10:38:19 PM • HP Bestec... • Answered on Oct 30, 2010
0helpful
1answer

Pavilion a614a power supply

hi,
if you have a 5V standby, look at the secondery side there is a defective capacitor you can change by a new.

6a7808a.jpg
10/30/2010 10:30:59 PM • HP Bestec... • Answered on Oct 30, 2010
0helpful
1answer

I have an hp pavilian

Whom ever told you too: "Unplug the cpu while holding down the power button".

Is telling you something that can "seriously damage" your cpu and computer.

Or did you mean "PSU" if so there is a particular format to do a Power supply check.
For the proper way use this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06788&lc=en&cc=us&product=405227&dlc=en&lang=en#N207

Also many other things can cause the problems your having. Could be your motherboard too.

If this does not work, post again be sure to include HP Pavillion Model number and Operating System (i.e. XP, 7 or Vista) that way we can help pin point your system needs. Also have you done any internal repairs lately? Recheck all your connections too.

If you find this helpful please vote.
10/8/2010 8:18:45 AM • HP Bestec... • Answered on Oct 08, 2010
0helpful
3answers

I have a burned out Bestec ATX-250-12z power supply

yes it should do provided your current psu is not a small mATX one. ATX power supplies are pretty generic. Make sure you get one that has enough connectors to suit your system, having said that, Considering it's an off the shelf PC I would guess most PSU's would have the right number and type of connections.
5/23/2010 8:31:45 PM • HP Bestec... • Answered on May 23, 2010
0helpful
2answers

PC does not start. LED at backside is blinking.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06788&tmp_task=solveCategory&lc=en&dlc=en&cc=us&lang=en&product=58792

This is a link to troubleshooting power supplies for HPs. You still have a few steps to do to confirm but it appears your power supply is bad. I think they have you unplug the hard drives and take any cards but video out then unplug the power, wait for a while and then try again but if the light is still flashing the power supply is bad.
10/1/2009 11:38:13 AM • HP Bestec... • Answered on Oct 01, 2009
0helpful
1answer

Blinking power supply LED

Your power supply is fried. I had the same problem with my Bestec ATX 250 power supply. I fixed the problem by installing the StatTech model: ATXPOWER250. It was easy to install and works well. It is almost identical to the original but more quiet. I got it for $29 at MicroCenter.com. Also at online Newegg.com, Radioshack.com, Provantage.com, June 20,2009
6/20/2009 9:20:41 PM • HP Bestec... • Answered on Jun 20, 2009
0helpful
2answers

Power led flashing...

The described problem might not be the Power Supply Unit, there are a number of different reasons that may cause this symptom. Consulting HP would be advisable.
4/27/2009 4:00:17 AM • HP Bestec... • Answered on Apr 27, 2009
0helpful
1answer

Power supply light flashing.

Computer power supplys are modular replacement fixes. Better to replace the whole thing then try to repair.
4/20/2009 9:27:30 PM • HP Bestec... • Answered on Apr 20, 2009
0helpful
2answers

Warning beep no boot

Re-seat the video card and memory first,
if it continues to beep count the beeps 3 long ,3 short .etc
they mean a code.
if you have 2 sticks of memory try using one.
2/15/2008 9:28:59 AM • HP Bestec... • Answered on Feb 15, 2008
0helpful
1answer

PC not booting

the mother board can have a short and the green light is on, replace the motherboard. when the power box goes bad, most of the time it shorts the mother board out, this has happened to me a few times. Farren
12/26/2007 4:54:30 AM • HP Bestec... • Answered on Dec 26, 2007
Not finding what you are looking for?
HP Bestec ATX-250-12ZD 250w HP Pavillion Zinfandel Power Supply Part 5187-1098 (ATX25012ZD) Power Supply Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Computers & Internet

  • HP Computers & Internet

Most Popular Question

gary pin 5v missing

  • Computers & Internet
Loading...