20 Most Recent Canon imageRUNNER 400 Printer Questions & Answers

Check your ink cartridges and make sure they Are firmly in place.

hi. that problem is related with the laser unit

replace the toner or drum

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay lwmrt

Enter the menu on the printer. Find the maintenance menu.

the horizontal registration home position detection mechanism has a fault

That's an error between any of the printer boards and the main controller PCB.

hello i will tell you what error means and how to fix the problem but you will need the service manual to help you 1. E677 error means that "The communication between the printer board and the machine has a fault."2. Check the connection between theprinter board and the PDL I/Fboard and the system motherboard.Is any of the pins bent or otherwisenot normal?3. If this not helped you must replace the printer boardYou can download the service manual for ir400 from the below link it will save u $$$:http://goo.gl/bFmfmNgood luck

Canon has this problem since they made their first printer..my printer was also behaving in the same manner couple of years ago. I changed the settings to more darker for the side which prints "lighter"..try doing it through the machine itself.

My canon ir 330-400pcl eror E677 how to..

i required the ppd file for install the canon imagerunner 400 printer for linux systems.

pls mail it for [email protected]

press the system button. go to set up option. go in network set up mode give IP address and subnet mask in copier.then you switch machine off and then on.and now you can connect through network cable.

full toner

You need to set the start-up options to not print the this page. You have posted in the Canon ImageRunner section but say it is a xerox.....

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay klatg

Here are the dimensions for the printer.

Dimension 27-1/8" x 28-3/8" x 26-3/8"
(689mm x 691mm x 645mm)

Good Luck