20 Most Recent True TD-95-38-LT Beverage Cooler - Page 8 Questions & Answers

Hi Joe, my name is Roger and i'd be glad to help you, i assume that when you refer to the fan on the bottom is the condenser fan motor. if that is the case, please check if the compressor is coming on or not. if the answer is no, then you are most likely having issues with your cold control or t-stat. hope this helps I’m happy to help further over the phone at https://www.6ya.com/expert/roger_e8672cfe67bf61a1

This thermostat is no longer available so be careful. Not knowing the workings though why not the direct approach. Adjust one screw in one direction (my guess is ccw) and see what temp changes. I would think the two screws are for high and low limits. If you cant get it higher (with knob at max) try the other direction first and then the other screw.... good luck.

Rick, Do you have the cabinet serial # for this GDM-37? With both Model and serial we can locate the wiper gasket you need. From just my primary research this is a 52" wiper gasket. We work with True models a lot and are able to order OEM wipers directly from True at a price below the list. We'd be happy to help you. Shoot us an email with model and serial and we'll quote you price and availability for the wiper gasket. [email protected] 855-288-2259 Thanks, Matt & The Cooler Gaskets staff

A GDM 69 three doors. Each door closes using a string attached to a weight, which runs through pulleys or copper tubing, and is held to the top of door. The pulleys or copper tubing can be accessed by removing the aluminum siding located inside cabinet on either side. The left side contains the pulley and weightfs or left and center door, the right for right door (each held on by 4 1/4 screws) . To make the door close, simply make sure string is attached to weight, running though pulley, and attached to top of door.

Only if there are screw holes on the opposite side. In that case, invert the door, install in other screw hole. Most likely, since true won't give up diagrams, you would have purchase a left hand door and hinges. Call true at +1 800 325 6152

Bad thermostat.

Try a Supco 3n1 start kit. If that doesn't do it then the compressor is done. Call the man, or woman.

Sounds like your condenser motor is ready to give up. Time to replace it let me know and I can supply you with the new motor.

Supco has a three in one start kit that can help the compressor to run longer. Although the Freon circulatory system may be clogged and the compressor is overheating internally tripping the thermal overload.

Assuming inside the cooler, your drain tube is clogged. Need to blow it out. Compressed air will do it. Drain empties out below next to the compressor. Unplug the unit first!

If you mean by low you mean number 1? This would mean the thermostat is bad. Number 9 would freeze everything anyway. I'm leaning towards a bad thermostat. Email if you want a thermostat [email protected]