20 Most Recent
Cannon AC Adapter - Page 4 Questions & Answers
How to clear error e000000 on cannon ir2520
. you need to clear that error from service mode first.
with the copier turned on do the next secuence
press aditional function
press 2
press 8
press aditional function
when #sssw appear on the screen search with arrows in the touch panel until CLEAR appear on the screen
press ok once
and search with arrows until ENGINE appear on the screen
press ok once
ERRCLR appears on screen . press ok one more time
turn off the machine from main switch for a few seconds
turn on again and make copy test .
if problem persist replace the fixing heater.
please rate this answer if it was useful to you
I have apage stuck in the printer, how do i remove it? i have a cannon mx 450 printer.
Open the top cover, then open the hatch at the back of the machine. You should be able to grab the paper and holding both sides pull firmly but slowly until the sheet releases and comes out. Check the sheet for tears or missing sections. If any bits missing, you will need to find and removes them.. Test the paper feed path before starting any important jobs.
Cannon mx490 color cartridge wont lock in place.
See if right cartridge is generic non original or not. Make sure no parts have been lost into the bottom sides of the machine. Pick it up and tip side to side.
Hear bits slide around tip them out maybe lock support etc. Have you taken the orange or coloured cover off they came in. Like a ink cap
Not finding what you are looking for?