Top 20 Toshiba Estudio 200L Copier Questions & Answers

Try by resting switch on the copier while holding "0 & 8 "button enter 690 press print button enter 2 and press enter ,wait till the massage appear reboot the machine.

Communication error between System-CPU and Scanner-CPU

You might need to have an enabler, which will fix to your copier.

Main Motor Error

The default password is either 12345 or 123456. If neither of those work then, turn machine off then power on while pressing the 0 & 8 keys then enter 263, then press Start. It will then display the Admin Password.

Switch on the machine while pressing "* 1 3"

Usually it's 123456 on most Toshibas, unless someone has changed it from factory setting.

reset toner life counter. enter system mode (hold 0 & 8; switch ON) enter 673, follow... or 695, enter 0 in it.

system mode (hold 0 & 8; switch ON) enter 673, enter 0; or enter 695, or check items in system mode

some copiers will not recognise any toner cartridge other than genuine units It is a way of making you buy their products only. Check that out first .

123456

Check thermistors and clean if required , most likely heater section related.

check your print quality settings, your settings may be in draft mode. if correct, I.e. document or picture, check and replace your toner, printer cartridge

How con i INCREASE , color of copy in toshiba 452 please sent to my add the GUIDE code toshiba [email protected]

0+8 >69 >turn to 0 and save

needs fuser rebuilt

turn copier offhold down 0 & 5 while turning it onthen wait then unplug socket developer unit , then press 205 then press start then figure increase by number keys then press start then press intrrupt hope m/c repairthen 0 and set

Here you can download all possible drivers for that machine:http://business.toshiba.com/support/downloads.jsp?site=usa

THIS SHOULD ONLY BE DONE IF YOU REPLACED THE DEVELOPER, OTHERWISE IT CAN DAMAGE THE DEVELOPER CURRENTLY IN THE MACHINE turn off machine . turn it on holding 0 and 5 when machine starts enter code 200 after about 2-5 min it will go ito adj. mode. press the enter key on the bottom of the display.
.

press the counter button then the deartment managment. passowrd is 123456 then you can register a new department code from the register department menu