Question about Toshiba Estudio 200L Copier
Posted by Anonymous on
SOURCE: Error code in E studio 150
Hello! I did it and it worked perfectly.
I entered the SIM mode : CLear - Auto- Clear - Auto- then I pressed 14 -Start- Clear and then , the machine automatically warmed up and came to ready...Please, How can I be a copier Tech? I'm so eager to learn that. LET ME KNOW SO I CAN HELP OTHERS. THANKS SO MUCH...
Posted on Feb 20, 2008
SOURCE: toshiba 160 error code
c44 = fuser error
turn copier off
hold down 0 & 8 while turning it on
then wait one min, then press 4 0 0 start
then 0 and set
turn off wait one min then turn on if this does not work it might need parts
Posted on May 08, 2008
c380 indicates auto-toner error for black developer (K).
Is the harness between the LGC board and the developer unit drawer connector open-circuited?
Is any harness inside the developer unit or the auto-toner sensor harness open-circuited?
Is the auto-toner sensor connector or the connector CN341 on the LGC board disconnected?
IF connector no problems, then u probably need to replace the auto toner sensor.
Posted on May 28, 2009
This is an overvoltage error....Really need a tech to fix this...could be bad wall voltage....or the thermostat in the IH unit...or the fuse in the IH unit...or the logic board....
Posted on Nov 04, 2009
Tips for a great answer:
Sep 28, 2018 | Toshiba Office Equipment & Supplies
May 02, 2018 | Toshiba Office Equipment & Supplies
Nov 06, 2017 | Toshiba Office Equipment & Supplies
Jul 06, 2017 | Toshiba Office Equipment & Supplies
May 22, 2017 | Toshiba Office Equipment & Supplies
Nov 10, 2015 | Toshiba Office Equipment & Supplies
Aug 12, 2012 | Toshiba Estudio 200L Copier
Mar 07, 2012 | Toshiba e-Studio 350 Copier
May 10, 2010 | Toshiba E-STUDIO 850 Copier
136 people viewed this question
Usually answered in minutes!
Level 2 Expert
Level 3 Expert
Level 3 Expert
Step 2: Please assign your manual to a product: