Toshiba Logo

Toshiba Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 8K Products
  • 250K Answers
  • 4M Views

Flashing blue light means it is working!
solid blue light means it is not working!
no light means its not on!

Toshiba... | Answered on May 18, 2020


0156, 0060, 0154,

Toshiba... | Answered on May 17, 2020


You have to remove the back and you will see about four bolts that that need to be remove to disconnect the stand.

Toshiba REGZA... | Answered on May 15, 2020


1) The solution for this is No, you cannot upgrade or replace the graphics card in your system. One major point that you may need to understand is that the graphics card will be soldered in the motherboard of your system.

2) Replacing the motherboard will cost you almost the price of your device. So, I would suggest you purchase a new device with a better specification.

3) You can also try attaching an external GPU if you are not using your laptop as a portable device. The additional GPU is used only when you play some heavy games or if your graphics card is not properly working.

4) Make sure you do not move your external GPU often. If you do so, issues may occur.

For more printer related assistance just give a call @ 1-866-293-9220.

Toshiba... | Answered on May 15, 2020


sorry. I can't say because I don't know if you are fixing your car or stealing one. Best bet is to call the dealership or hit up google.

Toshiba Bdx2250... | Answered on May 15, 2020


error is a common system error which tells you that rtl120.bpl file is missing or corrupted when you try to open certain files, applications or just start up the computer. Usually rtl120.bplerror happens when there is a conflict in the path of the Dynamic Link Library or when there is some missing/ corrupted entries in Windows registry. rtl120.bpl error may cause the related programs stop functioning and accesses areas of your system memory incorrectly.
Method 1. Fix rtl120.bpl error Manually by Going Tweaking The Registry Keys.
  • a. Click "Start" menu--"Run"--type in "regedit".
  • b. Delete these registry keys as below manually:
    HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun
    HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionRun
list.jpgMethod 2. Fix rtl120.bpl error by Disabling Related Programs from Startup.
The DLL file would be infected by virus or Trojan. If the anti-virus program on your computer detects and deletes the infected file, you would probably receive error message alarming you that the DLL file cannot be found. You absolutely will fail to run the relevant application or program but keep receiving DLL error message on the startup. In such situation, you have to re-download and install the application to re-register the DLL information. Accordingly you have to disable an application run automatically on system startup in order to avoid such DLL error message:
  • a. Click "Start" menu--"Run"--type in "msconfig"---Start--- select the certain item to disable.
  • b. Reboot your computer.

Toshiba... | Answered on May 14, 2020


I think that Toshiba had a website has a website for Canada and the US then for products and goods and items and support services you you try to call and email them then and see if they have the exact same remote then for your TV and see if they can help you out too. It is always better to use official products then. You could try and use an none official remote for your TV it might not be compatible or it might not work.

Toshiba... | Answered on May 14, 2020


You can't, you need to buy a new remote.

Toshiba Se-r0225 Dvdr Remote Control D-rw2 D-rw2sc D ...

www.amazon.ca > Toshiba-Se-r0225-Control-D-rw2sc-D-rw2su
With out this Remote you can't do much with the Toshiba DVD Recordet D-RW2 it controls most of functions for recorder including labeling and finalizing.

Toshiba Se-r0225 Dvdr Remote Control D-rw2 ... - Amazon.com

www.amazon.com > Toshiba-Se-r0225-Control-D-rw2sc-D-rw2su
Rating: 4.9 - ‎10 reviews
With out this Remote you can't do much with the Toshiba DVD Recordet D-RW2 it controls most of functions for recorder including labeling and finalizing.

D-RW2SU / D-RW2SC - Toshiba Canada

web1.toshiba.ca > support > ceg > manuals > DVDRecorders > D-RW2S...PDF
Using a remote control. Preparation of the remote control. ? Install two "AA" size batteries (supplied) matching the polarity indicated inside battery compartment ...

Toshiba... | Answered on May 14, 2020


C447 Error - Heater lamp abnormality after abnormality judgment (temperature abnormality at ready status)

Power voltage Check if the power voltage is normal.(Is the voltage during the operation ±10% of the rated voltage?) Thermopiles • Check if the fuser belt center and side thermopiles (front, rear) are installed properly. • Check if the harnesses of the fuser belt center and side thermopiles (front, rear) are open circuited. Power supply unit and fuser unit • Is the fuser unit installed correctly? • Check if the heater lamp is broken. • Check if the connector of the heater lamp is disconnected. • Check if the thermostat is blown • Check if the connectors of the power supply unit are disconnected (power supply unit AC output connector CN408, CN409 and LGC I/F connector CN404 CN405). • Check if the power supply unit is abnormal. LGC board • Check if the connectors CN333, CN345 and CN361 are disconnected. • Check if the conductor pattern on the LGC board is short circuited or open circuited. Status counter After repairing the matter which caused the error [C411/C412], perform the following: • Turn ON the power while [0] and [8] are pressed simultaneously • Key in "2002", then press [START]. • Change the current status counter value "1 " or "2 " to "0", then press [OK] or [INTERRUPT] (to cancel [C411/C412]). • Turn the power OFF and then back ON. Make sure that the equipment enters the normal ready state.
5 Clear the status counter Change the current status counter value (08-2002) "3", "5", "6", "9", "19", "21", "22", "23", "24", "25", "27", "29" or "32" to "0" for [C44X], taking the same procedure as that for [C41X]. * The status counter value is as follows in the following cases. - The error occurred during warming-up: "3", "5" or "6" The error occurred after the equipment has become ready: "7". - The temperature detected by the fuser belt center thermopile is 220°C or higher, the temperature detected by the side thermopile is 230°C or higher or the temperature detected by the front thermopile is 250°C or higher: "9", "19", "21", "22", "23", "25", "27" or "29" - The error occurred during printing: "24" or "25". - The error occurred during energy saving: "27". - A paper jam occurred: "29".

Toshiba Office... | Answered on May 13, 2020


https://www.youtube.com/watch?v=5yRQejXvi9M

https://translate.google.com

¿C?mo hago para que mi computadora port?til Toshiba arranque desde USB?
Para arrancar esta unidad despu?s de muchas horas de intentarlo, lamentablemente solo por un error:
1.¡Reinicie su BIOS a la configuraci?n predeterminada!
2. Deje Secureboot activado.
3. Desactive Fastboot.
4. Guarde la configuraci?n con F10.
5. Mantenga presionado F12 mientras inicia para acceder al men? de inicio y seleccione su USB.
6. ¡Deber?a arrancar!
Toshiba C?mo: configurar la prioridad de arranque del sistema en BIOS

Toshiba... | Answered on May 12, 2020


toshiba tv stuck on retail lock how can i fix it ? nothing working try the remote unplugging everything
5_10_2020_12_44_36_pm.jpg

Toshiba... | Answered on May 10, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Toshiba Experts

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76321 Answers

Brad Brown

Level 3 Expert

18321 Answers

Are you a Toshiba Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...