Desa International Comfort Glow Infrared Vent-free Gas Space Heater - Answered Questions & Fixed issues
Pilot won't light
You may have to bleed some more air out of the system.
Your ODS pilot may be clogged with dust or lint and needs to be blown out with air(less than 30 psi).
Your regulator or gas valve may be faulty.
3/4/2010 4:26:41 AM •
Desa...
•
Answered
on Mar 04, 2010
•
590 views
Vent less gas heater wont stay burning. starts
If your heater does not stay burning then you should check each of the internal components over to ensure that they are working properly. Look at your heater's manual to do this. Failing this, the best thing to do is to buy a new one as the cost of repairing one can cost loads of money. Good luck :)
http://www.ventless-gas-heaters.com
2/27/2010 9:34:42 PM •
Desa...
•
Answered
on Feb 27, 2010
•
492 views
Do I leave gas value open when comfort glow vent
Just for tha sake of safety, close it!. You never know when something will happen. Usually right after you have questioned something and ignore it! Good luck...Lee
11/11/2009 9:38:32 PM •
Desa...
•
Answered
on Nov 11, 2009
•
160 views
The pilot on my Comfort Glow Gas Logs CLD3924PTA
You must have some kind of flame sensor and it sounds as though it is not working correctly. If the pilot lights and then goes off, I would look there first. Good luck...Lee
11/6/2009 3:02:30 AM •
Desa...
•
Answered
on Nov 06, 2009
•
668 views
I have a Comfort Glow propane heater connected a
If you have a pilot, you have a thermocouple. I would start with the thermocouple. The thermocouple is supposed to be heated by the piolet and to keep the pilot gas on. If it is faulty, the pilot will quit and the heater will not reignite until you light it again. Good luck...Lee
9/22/2009 3:34:33 PM •
Desa...
•
Answered
on Sep 22, 2009
•
618 views
Have Model CGP30TB Copmfort Glow propane
sounds like an obstruction in pilot assembly.try using canned compressed air to blow directly into pilot. this technique is successful about 70%. if not,pilot assembly must be removed and cleaned thorougly
9/16/2009 10:02:58 AM •
Desa...
•
Answered
on Sep 16, 2009
•
1,098 views
Not finding what you are looking for?