20 Most Recent General Electric WBSR3140GWW Top Load Washer - Page 6 Questions & Answers

First you take off the front cover of the Machine that is held in place by two clips at the top. then you look at the bottom of the frame assembly that holds the motor. You will find that when the Machine fills with water and clothes the tub drops way down!! and the frame rubs on the bottom pan of the washing Machine. My machine was new!!! and I made two Pads from the old washing machine feet and put them through the two holes in the frame and put a little grease on them and it works like it should GE your engineers should have seen this!!!!! Thank You FROM K.C.Morris God Bless America

The inlet valve is usually connected inside the machine and connected directly from the water source.

Well if you use dry detergent than dry using a lighter duty liquid detergent, and be sure to buy the right kind. If your machine is high efficiency the get the h.e. approved detergent.

Hold the pause button

its a clogged drain pump

Who told you that you need to fix the capacitor?

What is the model number of your unit?