20 Most Recent
Rival CM5520 - Page 7 Questions & Answers
Hi, my carezza builds up pressure, but the water that comes out is a trickle, even when I've removed the group head. Steamer wand works, but I can't get enough force to make an espresso.
It sounds like there may be a blockage in the coffee delivery system of your Carezza. Here are some steps you can take to troubleshoot the issue:
- Check the filter basket: Make sure the filter basket is clean and clear of any coffee grounds or debris that could be causing a blockage.
- Clean the group head: Remove the group head and clean it thoroughly with a brush and hot water. Pay special attention to the holes where the water comes out.
- Check the water tank: Make sure the water tank is full and properly seated in the machine. If the water tank is not seated properly, it can cause low water pressure.
- Descale the machine: Over time, mineral deposits can build up in the machine and cause blockages. Descaling the machine can help remove these deposits and improve water flow.
If these steps do not resolve the issue, it may be necessary to disassemble the machine to check for more serious blockages. If you are not comfortable doing this yourself, it is recommended to take the machine to a professional for repair.
Jura Impressa C9 Grounds container filling with water or Coffee. Grounds floating.
It sounds like there may be a blockage in the brewing unit or the drainage system causing the water and coffee grounds to back up and overflow into the grounds container.
You can try cleaning the brewing unit by removing it from the machine and rinsing it with hot water. Be sure to clean all the nozzles and crevices to ensure there is no blockage.
You should also check the drainage system for any clogs or obstructions, such as coffee grounds or debris. This can be done by removing the drip tray and examining the drainage hole at the bottom of the machine.
If these steps do not resolve the issue, it may be necessary to contact a professional for repair or servicing of the machine.
User manual for a crofton TI-CM-1013 COFFEE MAKER WITH THERMO JUG
Unfortunately, there is no user manual available for the Crofton TI-CM-1013 Coffee Maker with Thermo Jug. However, it is possible that the warmer plate can be switched on by pressing the "on/off" button. If this does not work, then it is likely that the warmer plate is not functioning properly and may need to be replaced.
Jura Impressa C5 all lights are flashing, Cant descale or clean. What do I do?
When all the lights on your Jura Impressa C5 are flashing, it typically means that the machine is experiencing a malfunction or error. Here are a few steps you can try to troubleshoot the issue:
- Turn off the machine and unplug it from the power source for a few minutes, then plug it back in and turn it on again. This can sometimes reset the machine and clear the error.
- Check the water tank and make sure it is filled to the appropriate level. If the water tank is empty or low, the machine may not be able to function properly.
- Check to see if the brew group is properly seated in the machine. If the brew group is not properly seated, the machine may not be able to start a brewing cycle.
If none of these steps work, it's possible that there is a more serious issue with the machine that may require professional repair. In that case, you may want to contact Jura customer service or a professional appliance repair service for further assistance.
Brand new Lavazza Desea coffee machine - frother is losing steam around the head and not enough froth to make latte. Help!
1. Fill the water tank: Fill the water tank with cold water and make sure the tank is securely in place.2. Load the coffee beans: Open the top lid and fill the funnel with coffee beans of your choice.3. Select the desired program: Use the selection buttons on the front panel to choose the desired program.4. Start the machine: Press the Start/Stop button to start the machine.5. Wait for the desired coffee: The machine will grind the beans and dispense the desired coffee in a few seconds.6. Empty the grounds container: Remove the grounds container and empty it.7. Rinse the components: Rinse the funnel and the other components with hot water after each use.
Magnifica S no water but sometimes has coffee?
The problem you are describing with your Magnifica S coffee machine, where it doesn't put out water when you turn it on to rinse, but sometimes outputs the coffee and other times just dumps it out into the tray, could be caused by a few different issues. Here are a few things you can check:
- Check the water tank: Make sure that the water tank is properly filled and that the water level is high enough for the machine to function properly.
- Check the water pump: Make sure that the water pump is functioning properly and that it is not blocked or clogged.
- Check the water lines and hoses: Make sure that the water lines and hoses are not clogged or blocked.
- Check the machine's settings: Make sure that the machine's settings are correctly configured.
- Check the machine's firmware: Make sure that your machine's firmware is up to date and that there is no error.
- Check the machine's grinder: Make sure that the grinder is not clogged and that the grind setting is set correctly for your beans.
If none of these steps resolve the issue, I would recommend contacting the manufacturer or a professional repair service for further assistance. They may be able to provide additional troubleshooting steps or may recommend a qualified technician to repair the unit.
Problem separating bulk salt or pepper corns container from the motor base on Trudeau Graviti mills
If you are having trouble separating the bulk salt or pepper container from the motor base on your Trudeau Graviti mill, there are a few things you can try to fix the problem:
- Make sure that the mill is unplugged and not in use.
- Carefully pull down the motor base from the container and rotate it counterclockwise as the instructions indicate.
- If the parts are still stuck together, make sure that the square shaft is properly aligned with the base. Sometimes the square shaft can become misaligned, preventing the parts from separating.
- Check the square shaft to ensure that it is not bent or damaged in any way. If the shaft is bent or damaged, it may not be able to rotate properly and the parts will not separate.
- Check for any debris or food particles that may be lodged in the connection between the container and the motor base. Clean the parts with a dry cloth and make sure that they are free of debris.
- If the issue still persists, you may want to consult the user manual for your mill. The manual should have specific instructions for separating the parts.
- If you do not have a manual, you may be able to find one online by searching for the model number of your mill.
- If you are still unable to separate the parts, you may need to contact the manufacturer customer service or a technician for assistance.
Pasquini Livia 90 Automatic. It works fine and shoots perfect for about 5 minutes after it reached the temperature.
The problem you're describing with your Pasquini Livia 90 Automatic Espresso machine cutting out and the lights flashing after reaching the proper temperature could be caused by a number of issues. Here are a few steps you can try to troubleshoot the issue:
- Check the temperature sensor and ensure it is properly connected and functioning correctly. Make sure it is not blocked or damaged.
- Check the thermostat and ensure it is properly calibrated and not damaged.
- Check the heating element and ensure it is not damaged or malfunctioning.
- Check the water pressure and ensure it is not too low or too high.
- Check for any blockages in the water or steam lines and clear them if necessary.
- Check for any clogs in the group head and clean it if necessary.
- If the above steps do not resolve the issue, it may be necessary to have the machine serviced by a professional technician.
How do I test secondary boiler on Saeco Vienna Deluxe
It sounds like you are experiencing an issue with the secondary boiler on your Saeco Vienna Deluxe coffee machine. In order to test the secondary boiler, you will need to follow these steps:
- Remove the water tank and the brew group from the machine.
- Locate the secondary boiler. It is usually located in the back of the machine and is a small, cylindrical shape.
- Check the thermostat: Use an ohmmeter to check the resistance of the thermostat switch. If it is closed, the resistance should be very low (around 0 Ohm), if not, it could be the reason for the failure.
- Check the thermal fuse: Check the resistance of the thermal fuse with an ohmmeter. If the fuse is open, it will have a very high resistance (infinity)
- Check the heating element: Use the ohmmeter to check the resistance of the heating element. It should measure between 12-15 Ohms. If the resistance is outside of this range, the heating element may be faulty and will need to be replaced.
- Check the wiring: Check that all the wiring is properly connected, and that there is no damage or loose connections.
- Reassemble the machine: Once you have finished testing the components, reassemble the machine.
It's worth noting that if you are not familiar with the process of testing the components or if you find that the problem is more complex, I would recommend contacting a qualified technician or the manufacturer for further assistance. They will be able to diagnose and repair the issue with your coffee machine, and they can also give you an estimate of the cost of repair.
It's also worth mentioning that you should not test voltages of live unit out of its case, as it is dangerous and could cause damage to the machine or injury to yourself.
Drip Tray stuck inside our Jura s8 coffee machine
To reset your Jura S8 coffee machine and remove the stuck drip tray, you can try the following steps:
- Unplug the coffee machine and wait a few minutes for the internal components to cool down.
- Gently try to wiggle the drip tray to see if you can loosen it from its stuck position. Be careful not to force it, as this could damage the coffee machine.
- If the drip tray is still stuck, you can try resetting the coffee machine. To reset the machine, you will need to locate the reset button or switch. This may be located behind the water tank, under the machine, or in the control panel. Consult the owner's manual for the exact location of the reset button.
- Once you have located the reset button, press and hold it for a few seconds until the machine resets. This may cause the drip tray to release and be able to be removed.
Not finding what you are looking for?