20 Most Recent Sharp AF-S100FX Air Conditioner - Page 7 Questions & Answers

Sharp AY-XP 12 ER indoor inverter showing -0 13 error

in hot request fan is working after a time(not instant),if doesn-t work you have problem with freon gas or a senzor

Then stop trying and replace it with a newer one. If new is too expensive buy a used one on ebay.

The problem is with manual start button in the mother board of an a/c unit due to over heat of the button when it was running. Turn OFF the a/c Unplug the main power supply of the a/c open the filter cover penal of the indoor unit a black manual star button should be near the power connecting way try pressing it n making the button easy 2 work. See if there isn't any dust of moisture in the motherboard which will also result in such a problem. Set the remote to the correct mode, temp, fan speed. Put back all the covers and parts plug the power back in turn ON See if it works or contact the service man 4 any help

Maybe its the cord shorting out

hi..
1. Power down the air conditioner using the "power" button on the front
panel.
2. Unplug the air conditioner from the wall socket.
3. Hold the front panel "power" button down and plug the air
conditioner in. Continue to hold the power button down as the machine
goes through a brief test sequence (fan & compressor each come on
briefly, etc). There is a "beep" sound at the end of the test sequence,
and the machine will be off. At this point, you can release the power
button.
4. Unplug the air conditioner.
5. Plug the air conditioner back in.

thank u
rate me

It depends on what type of refrigerant is in the unit. Mineral Oil designed for R22. POE for R410a