Samsung PN42A450 Plasma TV "3 key" Questions

...3. Press and release the VOL+ key. (The green light flashes 4 times.) Now the VOL and MUTE keys will work only for the component selected by the MODE switch position. To Lock Volume to AV1, AV2 or ...

key. If the light flashes 3 times before the TV or component responds, you've cycled through all codes and the code you need is not available. You must use the TV remote control. 9) To verify the code

key (3 down) - Press Right arrow key to enter the Preferences (might not be needed) - Enter 1, 3, 8, 9, 3 and 1 on the remote You will now see the current region code displayed - Use the Up/Down arrow

key. Release it as soon as it works. 7. If all these keys work, press to save this TV brand code programming. The RED LED will blink 3 times and then turn off Your Remote Control is now programmed for

...key blinks (e.g., 3 blinks = 3) and write down the number in the left- most TV Code box (at end of this section). Note: If a code digit is "0", the selected mode key will not blink. Repeat step 4 ...

...key. NOTE: If the light flashes 3 times before the TV responds, you've cycled through all codes and the code you need is not available. You must use the remote that came with your TV. Solution found ...

...key. NOTE: If the light flashes 3 times before the TV or component responds, you've cycled through all codes and the code you need is not available. You must use the remote that came with your TV or ...

...key, 3) Press Down arrow key until you see Mode, then press the Right arrow key, 4) Press Down arrow key until you see Power Up, then press the Right arrow key, 5) Press Down arrow key until you see ...

...3 seconds). Release the key. The selected device key will continue to flash. 2. Enter the four digit code for the desired device using the number keys. After pressing the first digit, the device key ...

...key (TV, VCR, or CBL). 3. Hold down P until the red light blinks twice, then press 9, 9, and 1. The red light blinks twice again. 4. Aim the remote control at the device you want to operate. 5. ...