Haier HC125FVS Wine Cooler Beverage Cooler "adjust door seal right side" Questions

...adjust the height of the doors while moving my refrigerator my left door became higher than the left door. now the door is not sealing in the cold air and i am building up ice in the bottom of the ...

door is sealing properly. How do I adjust the doors to raise the left side of the doors? I see that the hinge on the bottom of the fridge door can be adjusted, By loosening the 3 screws and moving the

...pen or pencil to gentle adjust it to touch the cabinet. One it is touching and will stay allow the door to stay in that position until the heated area of the gasket is cooled and can retain its

...adjust the door? Sounds like it's come off the rails, empty it completely trays & all.  pull it all the way forward & lift it up it should fall or you may have to gently drop it back ...

adjust the spring tension on the door hinge to add more closing force. Is this a new unit? This is caused by air rushing into the other compartment through a damper control. Most mfr's. install an air

...door gasket does not provide an water proof seal just an air tight seal the ice maker can be adjusted, remove the cover off the frount of the icemaker and back the screw on the right side so that the ...

...door open when you adjust the level of the door and depending on your model the bottom may need to be adjusted as well. It should be pretty simple just open the door and hold it up a bit to about ...

...seal around the inside pf the door and make sure they are grabbing. You can put the front legs of the fridge down a little more so it gives the doors a back swing when closing. Make sure your hinges ...

...door to seal. Feels like it may even want to pop back open. I am sure it is a fairly simple adjustment but I am unfamiliar with these doors. Any help will be appreciated. Thanks. You need to replaced ...

...door will not seal. I have 1 shim at top hinge, and 2 at bottom just like it was. Any suggestions? Thanks in advance for any help! if you removed the inner section of the door for the drying process ...