1994 Geo Metro "replacing timing" Questions

I have a 1992 geo metro. I replaced the timing I have a 1992 geo metro. I replaced the timing belt and it runs forward at hits the timing cover. Why is this happening? you need to check the timing ...

I have a 2000 Chevy Metro 4 cyl 1.3...I just replaced the rod bearings and now the car won't crank. It will turn over but not start.I have already checked the timing and its in time. Any suggestio

No fire to coil replace coal and tested ignition No fire to coil replace coil and tested ignition control module with no luck. I have check all the fuse thinking maybe the ignition fuse had blown.... ...

97 metro starting problems the head is redone. replaced the alternator. put new rings and rod bearings in. it was runnning fine after i finished it all that. i heard some noise and replaced the water ...

1992 geo metro, can only get it upto 60mph, slow throttle it will increase in speed upto said point,quick throttle the car bogs down and has no power. what should I be looking for. no code recorded. ...

I had a jasper replace engine installed about 18 months ago, at that time of replacement, the car seemed to have just a little lack of power when going uphill. Now, you have to downshift into 2nd gear

TIMING BELT REPLACE 1996GEO timing belt replacement Sorry for the delay. I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to ...

replace timing belt Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for ...

replacing broken timing belt on 92 GEO The timing belt on my 1L Geo Metro broke and needs to be replaced provided the engine isn't trashed. I have no idea how to to align it so the belt is placed on ...

what should i set the timing at for my 94 geo metro i have a timing light should i set it at 0? Unless you have replaced the hood or the sticker has been removed, there should be a label on the inside