2002 Honda Civic "torque tightening specification 20 nm" Questions

torque specification in 4 steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows: Step 1: Tighten each bolt to 14 ft. lbs. (20

torque specification in four steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows: Step 1: Tighten each bolt to 14 ft. lbs.

TIGHTENING TORQUE [1] : 1st sequence: 40 Nm (30 ft lb) 2nd sequence: 60 Nm (43 ft lb) Final sequence: plus 1/2 turn (180°) Here are some additional specifications, thanks ntake Manifold Mounting Bolts

...20 ft-lbs (27 Nm) 3. Intake manifold bolts: - Tighten in sequence to 12 ft-lbs (16 Nm) - Tighten in sequence an additional 90 degrees Note: The above torque specifications and sequences are for ...

torque, followed by an additional 90-degree clockwise turn (angle tightening). Main bearing cap bolts: 25-30 Nm (18-22 lb-ft). Connecting rod bolts: 15-20 Nm (11-15 lb-ft). Crankshaft pulley bolt: 140

...the four corner bolts to 47 Nm (35 ft.-lbs.). Retighten all bolts a second time to the same specifications in step 4 to double-check torque. Finish by tightening all bolts an additional 1/4

...to the specific service manual for your vehicle for the exact torque specifications for each component. Using the incorrect torque specification can result in damage to the component or the

...bolts A - E 20 ft. lbs. (27 Nm). Fig. Main bearing torque sequence-3.7L engine. ...

...20 Nm Oil pan bolts: 10-15 Nm Oil cooler bolts: 10-15 Nm Note: These torque settings are provided for reference only, and may not be applicable to your specific vehicle. Always refer to the service ...

...torque wrench to ensure that the bolts are tightened to the correct specification, as over-tightening or under-tightening can cause damage to the components and affect the performance of the vehicle. ...