Question about Isuzu Trooper
Hello, can l use the 4jx1 gearbox if l was to replace it with 4jg2 engine .or l should change both with the gear box, advise. I was rebuilding my 4jx1 engine but l have been advised to change to ...
timing the belt of isuzu 4jx1 before you remove belt time mark on cam gear as well as crankshaft pulley, the timming mark on the pump drive gear (lower gear in this picture) will not line up but thats
...4JX1), it has no timing belt. Cam and ignition timing is by way of gears. No belt to replace. Posted by Hjalmare on Dec 09, 2009 the 1millionth post , with no country stated, no engine stated only ...
Question about Isuzu Cars & Trucks
...4JX1 starts well but lacks power when you press accelerator pedal and on take off. gears take time to change and high rpm. But after a few runs the car gradually gains power RUN SLOWLY WITH GENTLE ...
Question about Isuzu Cars & Trucks
...4jx1 engine what was the fly wheel marks if it was at tdc if flywheel is fitted in correct position the timing mark on the front top cambelt gear is at 12 O clock and with starter motor removed you ...
...4JX1) : 1 - Timing mark 2 - Cam pulley 3 - HP Oil pump pulley 4 - Tensioner pulley 6 Cylinder petrol: Align crank(C) timing notch mark (1) to oil pump mark. Align cam pulley(L+R) marks(3) to cylinder ...
Question about Isuzu Cars & Trucks
...opt for the diesel engine option of the 4JG2 3.1-liter (later superseded by the more problematic 4JX1 3.0-liter of 159 PS or 117 kW). A Borg-Warner torque-on-demand ("TOD") all-wheel-drive system ...
694 questions posted
Usually answered in minutes!
463 Questions
423 Questions
323 Questions
317 Questions
281 Questions