If flywheel is fitted in correct position the timing mark on the front top cambelt gear is at 12 O clock and with starter motor removed you will see 3 lines stamped in the interuptor ring that is bolted to the rear of the flywheel if manual on early builds, also there is a notch in flywheel which you can see if gearbox is out this goes at 6 O clock
SOURCE: My Isuzu Trooper 2004 4JX1 turbo just underwent a
The ECU will be fine with a engine rebuild but the 4JX takes a bit longer to start if all the injector oil paths are empty - can be up to 5 or 6 mins of 20 second cranking bursts.
Also if you rebuilt due to diesel in the oil from bad injectors the control valve for the injector oil pressure may be faulty so it wont start.
SOURCE: isuzu trooper 3 litre diesell oo year!
Set the engine on #1 tdc and the small half moon cut out on the flywheel goes at 6 o'clock . The sensor is now set to read the crank angle .
This is for the manual gearbox ,if you got auto its at 12 o'clock.
SOURCE: isuzu trooper 2002 RLV engine. camshaft timing
Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.
Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm
SOURCE: Hi! I have Isuzu Trooper 2002 year. ECM was
this website might help, Good Luck Tim:
http://www.car-part.com/
691 views
Usually answered in minutes!
Hi jonard villarosa, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? manual or auto?
×