1999 Ford Contour Vacuum Intake Manifold There is a vacuum leak and it is making a hissin noise but we can not find the leak?????? can you explain it little bit more i might be able to help you
how to find a vacuum leak on a 1999 ford countour 2.0 Check the tube between the engine and the intake manifold. I had one that broke there and the car idled up and the check engine light came on.
idling stall;but pressing gas pedal works Most likely a vacuum leak, check all lines off throttle body and intake manifold.
...the cheapest solution up: #1 check all vacuum hoses for cracks and leaks,#2 check and clean the mass air flow sensor (very carefully),#3 check intake manifold gaskets for leaks, #4 check oxygen ...
...intake manifold. Is there a service bulletin for a 1996 ford contour with this symptom? The code book is vague and suggests a oxygen sensor, MAP sensor, or other sensors. The code book says that bank ...
...intake manifold gasket leak cuz if gasket is alowing to **** air then air/fuel mixtue is off cuz compute cant account fo the extra air added....hope this helps...may try to replace fuel filter if ...
intake manifold gasket. I can't hear any air leaks. My idle bounces between 600 and 800 RPM when stopped at a light. Car runs great even at 250,000 miles. id check for vacumn leaks first,check
intake manifold. It would have to be a pretty big leak to cause the symptom you're having. Please see my tip at http://www.fixya.com/cars/r7427423-fix_poor_idle_high_idle_stalling_fuel . These are
...intake manifold for possible vacuum leaks. If there is a substantial leak, you will be able to detect a hissing sound if you listen closely. Often times the rubber elbows on the vaccuum lines will ...
807 questions posted
Usually answered in minutes!
875 Questions
405 Questions
353 Questions
309 Questions
276 Questions