1999 Ford Contour "cam sensor 1998" Questions

...cam sensor removal for a 1998 ford contor with a 16 vale 2.o over head cam engine The camshaft sensor is located at the back of the head on driver side. Remove the wire,unscrew the sensor,screw the ...

1998 ford contour gl. does anyone know where i may get one? it is a 4-cylinder. there is no timing position sensor. there are cam and crank sensors they are on the front cover and near the valve cover

where is the camshaft sensor on a 1998 ford contour gl with double overhead cam it is located on the exaust cam sprocket.

...cam timing sensor but the vct sensor is oil driven and have you changed to a heavier oil than recommended also did you check fuses for speedo do you have your manual for passenger and power ...

...1998 ford contour will start with starting fluid but wont stay running without seeing it here is my best answere, do you have the ability to pull codes if the cam and crank sensors are functioning ...

...cam and crank sensor It seems to me, by your comments that your engine may out of sinc with the ECM. This is almost worst case-scenario, so dont worry. You mention no spark? That is almost for sure ...

cam shaft sensor. one of this gots to b bad if the car only does it once in a great while. the other thing to do is pay for a diagnose and get rid of this head ache. some shops will credit you for the

...1998 ford contour cant time it with out something to go by could you send me something to go byso I can get the car on the road Note: Electronic Ignition engine timing is entirely controlled by the ...

...cam position sensor located on a 1998 mercury villager van Here's a couple of sites that will help you. ...

cam sensor location wher is my cam sensor located on my 1998 gmc sonoma If you have a 4.3 vortec the cam sensor is in the distributor.  Hope this helps you, kee3p me posted.