1999 Pontiac Firebird "misfire number 5 cylinder mean" Questions

misfire on cylinder number 5.In mosts circumstances when I have run across this on the Envoy and Trailblazer.It is a failed coil pack.Easiest way to check would be to swap cylinder 5 coil with another

...misfire on cylinder number 5  the p1145 is a cam timing code look at the misfire on cylinder number 5 first  bad plug or coil swap them to a different cylinder if you don't see black ...

...misfire and the 305 is for cylinder 5,and the 306 is for cylinder number 6.Check the plugs if they are good then you could have bad coils.They are top of the plugs.Hope this helps.Good luck. you have ...

...the #5 cylinder coil with another coil, and see if the misfire follows the relocated coil. I am having the same problem misfire on number 5 and 1131 code I moved the coil packs is still misfiring on ...

...number 5 and 6 not firing Do you mean that there is no spark going to #5 and #6 cylinders? If so, you probably have a bad distributor cap. The firing order on that engine is 1-2-3-4-5-6. So, 5 and 6 ...

...number one misfire means that the number one cylinder is no longer working as good as it should or is not working at all. The number one cylinder is on the back side of the engine on the passenger ...

...misfire engine code PO304 Dodge use a system called a "Lost Spark Ignition". Basically each coil fires two spark plugs on two different cylinders at the same time every time. One firing for the ...

...misfire, and we get codes P305 an d P316 again now that code 122 has stoped. Well code 316 means the computer has detected a miss during startup, and code 305 means cylinder number 5 is not producing ...

...number 5 cylinder came up, changed plugs and plug wires and its still doing it what else could cause this problem Misfire #5 may mean that one or more of the following has happened: Faulty spark plug ...

...code fix P0305 means misfire on number 5 cylinder, could be bad plug, ignition coil, injector, or wiring, or low compression , carry out a compression test if ok I would try a new coil on number 5 ...