2006 Chevrolet Venture "chevy overheating" Questions

...Chevy Ventures overheating & if it is due to the water pump, radiator or some other part. Any advice on this problem would be very much appreciated. You should probably replace the temperature ...

chevy venture - had a leak - car was overheating - filled with a sealant and refilled antifreeze - still overheating - radiator cap hard to get off - when car overheats the radiator cap is not hot but

chevy venture 3.4l overheating replaced water pump,radiator,thermostat. still overheating Have you replaced the intake manifold gaskets? These engines have a history of leaking intake manifold gaskets

...chevy venture started overheating changed the water pump and thermostat what else can it be? Hello heatheru26 and thank you for asking your question, on Fixya. Here is a simple process that will walk ...

chevy venture overheating problems My 2000 chevy venture is overheating at time. It seems that air is getting into coolant system. A little history. Head gasket replaced about 3 years back with intake

...Chevy Venture ran good for 2 days then the temp gage went red as if overheating. Now the mechanic is saying the heads may be warped/cracked. How can this be if they weren't cracked before we put ...

...Chevy Venture continuosly overheating we have replaced the following;Radiator,fan relays,thermostat,temp.sensor,upper and lower hoses,radiator cap. We tested fuses,waterpump.the heater core seems to ...

My 2001 Chevy Venture WB is overheating. The fan's will not turn on unless I turn on the a/c. Please help!!! coolant temerature sensor. $8 or fan relay less than $10. both available from rockauto.com

chevy venture overheating weve already replaced the thermostat 2 and replaced some hose now we find out the fan isnt going what could be the problem Most likely the wiring for the electrical supply to

...chevy venture is overheating and the heater is not working could be that you are low on coolant, this would cause you to not get any heat and also would over heat. How do you hard wire the enegine ...