1998 Chevrolet C2500 "replace" Questions

...to these points, then abruptly hesitates as if 'bogging' down. Have rebuilt throttle body, replace 1st gear @ 20mph, 2nd gear @ 30mph, accelerates nicely to these points, then abruptly ...

I have a 1998 C2500 Chevy truck I replaced the horn fuse and all I get is a clicking sound from the horn relay. Should I replace it also? What else could be wrong? None at this time. There are some ...

...the hazards not working? Beyond my hazards not working my right blinker flashes fast, yet I have replaced all bulbs and they all work. The left flashes normally. Are you sure the right side bulbs ...

2004 Chevy Silverado 2500HD 6.0L- loosing coolant I have a 2004 Chevy Silverado 2500HD, I am loosing antifreeze from some where but not sure where. I did a visual around the area of the water ...

instruction on replacing a fuel regulator in a 1198 chev pickup instruction on replacing a fuel regulator if this is a 98 with a 5.7 v8 pull upper intake off and you will find the reulator

need to replace rear axle bearing REMOVE WHEEL AND SHOULD BE 4 BOLTS AND A PLUG IN REMOVE AND REPLACE

Replace wheel cylinders in 1997 chevy 2500 Have a leaking cylinder and the bleeder valve is rounded off, can't open to bleed either. replace the wheel cylinder

CLUTCH HAS NO PRESSURE If hydraulic then bleed out the air at the slave cylinder and or replace slave and clutch master cylinder. If cable operated then replace the broken cable.

engine oil cooler line leaking. Is it easier to bypass the cooler or replace? its best to replace the oil cooler lines.this should have the lines that run from the radiator to the oil filter housing ...

another used engine will be itself so old that it needs rebuilding. oil sender is cheap and easy to replace, but your story sounds like it is working fine. Your problem could be a bad sending unit but