...crankshaft sensor, car still won't start I have an 06 Nissan Altima and my service engine light came on. Diagnostics check said it needs 2 sensors, crankshaft and speed sensors. Replaced the ...
...regency 98 elite crankshaft sensor? Remove the crankshaft pulley,the harmonic balance,with a puller made for this,then you can replace the sensor,and align it,if it is not aligned,it will break
Question about Oldsmobile Regency
...crankshaft sensor is bad it has 2 the engine has a 24X and a 3X sensor which should be changed 24X behind harmonic balancer or otherone Your ckp sensor is in the engine block in the back just above ...
Question about Oldsmobile Regency
...operating temp. Don't have clue I replaced coil pack, ignition module, oxygen sensor,crankshaft position sensor, fuel filter and fuel pump. i'm stumped? Please help? could be pickup coil in ...
replace crankshaft position sensor just replaced fuel pump, it does not start right away. Click the link below :----http://wikisolutions.blogspot.in/2012/02/get-free-answers.html
car keeps shuting down i would say to start with your crankshaft sensor
shuts off while driving Could be crankshaft sensor.
...sensor 5 months ago and still have the problem had it put on a dignostic test and it came up crankshaft senor error.. could it be both the crankshaft and the cam senor does it even have a cam in the ...
...crankshaft sensor, the ignition control module, the ECM, new spark plugs and wires. I will change the coil pack and the camshaft sensor ASAP. Some times I can drive for a week or two with no problem. ...
...sensor , so as long as the crankshaft is turning and the sensor and module are good you will have spark and fuel, it sounds like one thing you are missing is compression I think you should see if you ...
196 questions posted
Usually answered in minutes!
97 Questions
60 Questions
103 Questions
72 Questions
64 Questions