how to replace 1991 olds regency 98 elite crankshaft sensor? Remove the crankshaft pulley,the harmonic balance,with a puller made for this,then you can replace the sensor,and align it,if it is not ...
Replaced crankshaft sensor, car still won't start I have an 06 Nissan Altima and my service engine light came on. Diagnostics check said it needs 2 sensors, crankshaft and speed sensors. Replaced the ...
...sensor 5 months ago and still have the problem had it put on a dignostic test and it came up crankshaft senor error.. could it be both the crankshaft and the cam senor does it even have a cam ...
Question about Oldsmobile Regency
...once at operating temp. Don't have clue I replaced coil pack, ignition module, oxygen sensor,crankshaft position sensor, fuel filter and fuel pump. i'm stumped? Please help? could be pickup ...
replace crankshaft position sensor just replaced fuel pump, it does not start right away. Click the link below :----http://wikisolutions.blogspot.in/2012/02/get-free-answers.html
car keeps shuting down i would say to start with your crankshaft sensor
...shaft pulley on 91 oldsmobile You will need to remove the bolt(s) and then use a gear puller. The crankshaft pulley normally a harmonic balancer also and will be keyed with a drift pin. You should ...
shuts off while driving Could be crankshaft sensor.
...at the front of the motor. Big pulley on the bottom center of block is attached to the end of the crankshaft. Crankshaft runs all the way through trhe bottom of the block. Remove oil pan and you
Question about Oldsmobile Regency
1992 olds cutlass 3.1L shuts off low injector voltage which crankshaft sensor is bad it has 2 the engine has a 24X and a 3X sensor which should be changed 24X behind harmonic balancer or otherone Your
196 questions posted
Usually answered in minutes!
97 Questions
60 Questions
103 Questions
72 Questions
64 Questions