...remove oil filter housing - oil leaking out. How do you remove it? Bolt location, etc. The car just dumped almost all it's oil in the driveway while it was idling. The leak appears to be around the ...
...figuring it's a VR6 use a 6 mm allen socket to remove the drain plug to empty the oil and reinstall it. The use a 36 mm socket to remove the oil filter housing, replace the seal and torque it to
...oil filter screws in can it get a crack in it or is there a seal that needs to be replace seal under filter /some times the old one will stick in place and cause leak Theres an oring on that housing ...
...remove the oil filter housing properly on this engine. There is some sort of orange colored valve on the bottom of the oil filter housing that I don't understand the purpose of. Can you send me the ...
...oil filter screws onto. To replace the seal, remove the filter, remove both coolant hoses that attach to the cooler, remove the nut that secures the cooler to the block and slide the cooler off the ...
...oil filter housing may be cracked, I've tried replacing filter but its still bleeding oil in a matter of minutes from the top of the filter. could it be the housing unit or a simple o-ring? A common ...
...remove the oil filter, remove the nut that holds the housing together(it will be at the base of the stud that oil filter screws onto, 27mm deep well), clean out the old brittle cracked o-ring and ...
Question about Volkswagen Jetta
...Remove the oil filter and there is a nut that you take off (same threads as oil filter) the oil filter adapter will become loose, continue to slide it off, on the engine side of the adapter is the ...
...remove some parts or components to reach and replace it like the fuel filter. You'll need to detach the two wires connected to the outside, unscrew the sender from its housing, clean the gunk out of ...
666 questions posted
Usually answered in minutes!
1,072 Questions
1,150 Questions
968 Questions
1,003 Questions
917 Questions