2000 BMW 5 Series "remove oil filter housing" Questions

...change the oil on my 530d 2005. Is there an in-line filter as well? Do I need special tools? no in line filter,you only need a proper tool to remove oil filter housing they are a paper element

...oil filter was replaced and now leaks need to get new one and make sure you put a little oil on your finger and rub it on the rubber gasket on new filter and only tighten hand tight. the entire oil ...

...Oil Filter on BMW X5 4.4i V8 Engine Depends on the engine, if its a M62, its under the hood, torwards the front drivers side. If it a N62, it is on the underside of the vehicle, next to the oil drain ...

...remove four bolts and cover of the engine. not to forgot to cover oil fill after taking out engine covers.- take out the wire by slipping up the lock.- remove 2-10mm bolts of the ignition coil and ...

...remove oil filter housing Removing your oil filter housing is a simple task with the correct tools. You will need to evacuate the oil in the drain pan before removing the filter housing. You need a ...

...remove oil filter housing - oil leaking out. How do you remove it? Bolt location, etc. The car just dumped almost all it's oil in the driveway while it was idling. The leak appears to be around the ...

remove oil filter housing FROM the engine? THIS IS A 1998 MERCEDE BENZ E320 no you don't have to remove the oil filter housing. Mercedes Benz has a tool that fits right over the oil filter cap that is

...remove oil drain plug at bottom of engine oil pan, remove filter housing, remove oilf filter and o-ring. Replace o-ring and filter, rub o-ring with some new oil, replace filter housing, replace oil ...

...of the housing for the filter is this an easy fix or better to take to a shop Its a pretty easy fix with a litttle mechanical ability. Just remove filter,remove filter base/ oil cooler, replace ...

...a gasgket inbetween the block and housing. The oil filter housing is held on with three screws, and one is extremely difficult to get to. I also had to remove the belt and unbolt the a/c