Question about Mitsubishi Eclipse
...no gears how much was taken off flywheel ? was there a shim between crank and flywheel ? did you make sure spline count on clutch plate matched spline count and diameter on input shaft to ...
Question about Mitsubishi Eclipse
crank shaft vry hard to turn by hand with belts off timing betl and marks are perfect car died whie driving about 20-25 mph,would not restart the oil light was coming on and off for a few days before,
...bearings surely been damaged and stuck on the crank shaft and are not allowing the engine to rotate. Better to load the vehicle and take it to a qualified garage for inspection quotation and
Question about Mitsubishi Eclipse
...crank shaft seal --rear crank shaft seal --oil filter--sump gasket---power steering ---leaking rocker cover gaskets ---leaking oil pressure switch.--transmission seals. I suggest that you have the ...
Question about Nissan Cars & Trucks
...has fitted the spring to give the correct oil pressure to the crank and cam bearings, you can damage the white metal crank shaft bearings by increasing the oil pressure , fit the standard
...crank shaft timing code We have a 2006 Chevy trailblazer. Boyfriend a BIG raccoon the other day. Truck was fine next morning no leaks. Went to and from work fine all gages fine. Then he went to leave ...
...temp switch will need to be replaced. if the engine DOSENT turn then you have most probably welded the pistons to the block. seized the crank shaft or warped the head (head gasket) i hope this ...
...crank shaft sensor AKA cam shaft sensor on crank shaft located on passenger side of engine near crank shaft pulley # 2 IPC sensor Injection pressure control if has oil in sensor replace it & ...
...the cam shaft gear though. the timing mark on the cam shaft gear that aligns with the fuel pump gear is not directly across from the cam shaft gear that aligns with the crank shaft gear. out of ...
Question about Mitsubishi Eclipse
...crank shaft and/or camshaft bearings are worn out (on high mileage cars). Have you actually measured (with an oil pressure gauge, NOT the oi pressure switch) the oil pressure to verify that you are ...
171 questions posted
Usually answered in minutes!
696 Questions
644 Questions
360 Questions
344 Questions
319 Questions