20 Most Recent 1995 Mitsubishi Eclipse Questions & Answers

95 eclipse ECM fuse blown how do I replace it

Hello Sarah, check your owners manual to locate the fuse/relay location (if there is one) and its rating. The problem must be isolated as the fuse is designed to protect components in the system so if there is a short or a electrical problem that is causing a fuse to blow..this problem must be located or you will just continue to blow fuses.

1995 Mitsubishi... | Answered on Jan 14, 2019

1 Answer

Alternator belt

FTO? I forgot that those even existed.
which engine do you have?

4G93 1.8L SOHC 16v I4
6A12 2.0L DOHC 24v V6
6A12 2.0L DOHC 24v MIVEC V6

1995 Mitsubishi... | Answered on Sep 05, 2018

0 Answers

1995 Eclipse won't rev at times

1995 Mitsubishi... | Posted on Dec 11, 2017 | Be the first to answer

0 Answers

95 eclipse GS HELP!! PLEASE

1995 Mitsubishi... | Posted on Oct 22, 2017 | Be the first to answer

1 Answer

Redline upon startup

If your check engine light is flashing DO NOT even try to run the engine. Major damage could happen if it is flashing. Get it towed to a mechanic. I wish you the best of luck and hope you have not ruined it.

1995 Mitsubishi... | Answered on Sep 16, 2017

1 Answer

Hi, my 1995 Galant wont shift to overdrive. I

Boy O Boy, Don't throw that old trans away, It is most likely OK. Did you change the filter and fluid. A bad speed sensor or a bad torque converter lock-up solenoid will result in a loss of overdrive function. Perform an OBDII scan of the stored faults And look for Speed sensor and lock-up solenoid faults. Watch out for those shops, they will skin you.

1995 Mitsubishi... | Answered on Aug 13, 2017

1 Answer

I have a 95 eclipse

Probably a bad solenoid in transmission.

1995 Mitsubishi... | Answered on Aug 02, 2017

0 Answers

Shift hanging, transmission problems? Help I have a 1995 Mitsubishi Eclipse GS Automatic 2.0L 4 cylinder coupe. In the summer months or any hot day, it seems

1995 Mitsubishi... | Posted on Mar 09, 2017 | Be the first to answer

1 Answer

95 eclipse idles high, sputters at 4000 rpm, awful gas mileage and maybe misfiring. Any ideas?

FUEL FILTER SPARK PLUGS/WIRES AIR FILTER PVC VALVE

1995 Mitsubishi... | Answered on Nov 06, 2016

1 Answer

Why my 1995 Mitsubishi eclipse start when I turn the key. There is no clicking sound. the steering wheel locks up but I can get passed that. Also at first the lights would turn on but not any more.

It sounds like it's a short

1995 Mitsubishi... | Answered on Mar 21, 2016

1 Answer

1995 mistubushi eclispes 2.0 turbo how to quite down lifters after changeing the head gasket

have to lash down rockers --- if proper lash done will have to look and make sure oil is getting to lifters

1995 Mitsubishi... | Answered on Aug 24, 2015

1 Answer

Changed head gasket and lifters want hush

The lifters have not pumped up. How long have you let it run?

1995 Mitsubishi... | Answered on Aug 24, 2015

1 Answer

How to get lifters to quit chattering

Incorrect grade of oil can cause this, however, at high mileage, like many other components, the ticking occurs due to wear & tear. The best is to replace the lifters

1995 Mitsubishi... | Answered on Aug 24, 2015

1 Answer

RS 2.0. Where is the ECU located?

behind the radio, but you need to take the entire center display off.

1995 Mitsubishi... | Answered on Aug 17, 2015

3 Answers

I have a 95 eclipse gs i can start the car with the cam position sensor unplugged but take a few cranks to start. it stays running when i plug it in while running but when i turn off the car and try t

run the fault codes to check that it is the problem . Cam position sensors have critical air gap measurements ---or prone to the air gap being contaminated with stuff and the rotor being loose or damaged

1995 Mitsubishi... | Answered on May 29, 2015