2007 Dodge Ram Truck "fire wrong" Questions

Okay I put in new spark plugs and cap and rotor new wire's then proceeded to turn on the vehicle and it did not start up the vehicle ran before I did this tune up so where did I go wrong thank you ...

...dodge ram keeps back firing we replaced the plugs, button, cap,wires and coil and its still back fires You need to get an exact firing order diaghram for your make,model and engine, call any ...

Basic tune-up procedures: Firing order, Cap/Rotor/Plugs/Wires, what order, what is the firing order? Check the intake manifold...the firing order on my Dakota is cast on the surface of the manifold. ...

...FOR THE ht LEADS ) and if it is 180 degrees out it will not start. If it starts and runs but backfires then you will have the firing order wrong on 2 ...

Changed distributor cap and changed plugs and wires now the truck own't start. It fires but won't roll over. It's not getting any spark to the coil. Any thoughts on what may have happened please? ...

wrong scan says misfire or tps I have seen this problem on a ford and a chevy where it feels like there is a transmission problem then scan shows a miss fire, a tune up cleared up both of them however

trouble code PO 032 Trouble Code: P0032O2 (B1 S1) Heater Circuit High Possible Causes: O2 heater element is damaged or the heater has failed.O2 heater control circuit is open or it is shorted to power

Any tricks to changing the distributer cap on a 1999 Dodge Ram 1 Looks like I have to dismantle the top of the engine. believe it or not it can be done .....but its no fun even for me and I do it for ...

truck starts then dies i changed the spark plugs and wires on my 1996 dodge ram 1500 pickup 5.2 L put the plugs on wrong so i had to look up the firing order and redo the wires now i got that fixed ...