magnatron and it seems to work fine. Not sure why its cutting off after a few secs. Any thoughts work be great. Thanks, Frank Monteleone 914.646.8105 after 4 seconds of running a cs code pops up cheak
Question about Whirlpool Microwave Ovens
...magnatron or the high-voltage capacitor and diode. Replace the capacitor and diode then if still not working, replace the magnatron. Its only affordable if you do it yourself - buy the part on EBAY - ...
Question about Jenn-Air Microwave Ovens
...magnatron or the high-voltage capacitor and diode. Replace the capacitor and diode then if still not working, replace the magnatron. Its only affordable if you do it yourself - buy the part on EBAY - ...
magnatron energy portion. Of this portion, the biggest problems are the hi-volt diode and hi-volt capacitor, or the connections to them (sometimes arc and burn to the point of failed contact). CAUTION
...magnatron and it seems to work fine. Not sure why its cutting off after a few secs. Any thoughts work be great. Thanks, Frank Monteleone 914.646.8105 Got a cs code ,was able to clear the code by un ...
...magnatron checked good, transformer reading 0.8 primary,heating wire 0.3, secondary 0. could the secondary reading cause the fuse to blow ? Hello James Having a 20 amps fuse is a bit high in todays ...
Question about Jenn-Air Microwave Ovens
...magnatron has shorted out. i don't know of a way to test them unless you have some high dollar equipment. a continuity test prob wont tell you anything. what reading did you get on the cap when you ...
Question about Microwave Ovens
burn your house down! If you are a cheap weasle and willing to possibly die for hot food, you can buy a replacement magnatron and spring new life into that old, slime-filled microwave oven! It's ture!
...magnatron cutout and fuse are fine. Should I replace the bad fuse and hood fan cut out and try it or could something else be wrong? The hood fan thermal cutout is probably not bad. It should read ...
magnatron be checked with an ohm meter? If it goes dead almost immediately after pressing the Start pad, that's usually a shorted high-voltage capacitor. If it goes dead several seconds after pressing
162 questions posted
Usually answered in minutes!
43 Questions
39 Questions
46 Questions
26 Questions
28 Questions