Whirlpool LHW0050PQ Front Load Washer "threading wire lock machine" Questions

...machine,slamming the door shut and hard stopped this but now it makes no difference and i cant get it started at all....what can i try now? The "F16" on a Bosch indicates the door is open / unlocked. ...

...lock switch, you need a new speed control board. Check the coin trap. If it is plugged this will happen. Remove the bottom front cover, You will see a black rubber boot where the drain is. There will ...

Easiest way to change drum bearings Please could you tell me the easiest method of changing drum bearings on a Creda Excel 1200 V120VW I have changed the drum bearings on our Creda Excel 1200 V120VW. ...

...wire and your door will unlatch the magnetic lock. Your door most likely is in alarm from water remaining in the tub. There is a drain plug in the same hole and behind it is a drain fluff or filter ...

Lock/Unlock. It IS a problem for the F/DL error. It is not making a good connection. Next the blue wire on the LHS of the CCU, last set (back) there are three blue wires. These 3 go to the MCU and are

...machine which I threaded the wire thru. Place the spring on the other end and pull the spring with needle nose pliers. To allow you to get the hook onto the end of the spring thru the other loop on ...

machine wdl2060 how do i open this I had the same problem. If it's stuck you may want a tool. I ended up using a pair of pliers on this plug. You may want to use a pair of vice-grip locking pliers and

...wire harness between ccu and motor controller. The punch down connections don't hold up to the vibrations the machine makes. may the force be with you! There are some other threads in fixya with the ...

...the set screw hole and the spin tub holes are lined up you will be able to push the wire in...add some lock tight to the screw threads and reinstall the set screw. Picture of where this set screw

...wire clip).  There is a white catch release on the outside rim where the pump meets the opening in the housing.  This is a "bayonet" mount which is a "twist/release" and "push/twist" method ...