Question about Galaxy Radios Radio Communications
...Galaxy DX-99v trans ok recvr ok haven't removed the case yet The S meter is stuck on a Galaxy DX-99v trans ok recvr ok haven't removed the case yet the meter probley is bad common problem ...
Question about Galaxy Radios Radio Communications
Galaxy DX 99v and when i key up the frequency counter scrolls up and down on it's one.what can i do to fix it? this also happens when i turn it on some times but i don't even have to touch
galaxy dx 99v i have a problem with the req counter sometimes only first 3 lights up with nothing but 8's sometimes all of them just 8's hmmmmmm not sure why i bought it like that SOUNDS LIKE TO ME.. ...
Question about Galaxy Radios Radio Communications
i have dx99 it works good when it works you can put your finger on the board inside and it works what mite be my problem you have a crack in the pcb board.
Question about Galaxy Radios Radio Communications
Galaxy dx99v, bad squeal when I key the mic Your microphone wires may be shorted take the mic plug apart (small screws) Now check for frayed wires touching or twisted together! With the wires being ...
weak xmit - draws excessive current Hi and welcome to FixYa, On your posted description of the problem, initial check would be a possible leak of either the drive transistors(TR44 to TR46) or the ...
low volume volume low on recieve turn the volume selector up a little at a time and see what you get.this could be a voltage problem
Question about Galaxy Radios Radio Communications
...Galaxy Dx-99V in Canada. Might be a problem finding a DX99V anywhere. That model has been discontinued. Best bet would be to Google it.. ....Don at NTCB, Inc. I have one. Email me at ...
i got a dx99v cb it turns on but its not transmitting or receiveing the needle barely moves. You may have a bad regulator transistor. Good Luck on this problem, and I hope this has helped. Ed ...
Question about Galaxy Radios Radio Communications
Uniden UHF CB. Busy light is constantly on and scan button does not work as a result. Manual channel adjustment is the same. Any ideas??? could be a strong signal overpowering the unit and causing a ...
36 questions posted
Usually answered in minutes!
3 Questions
2 Questions
27 Questions