Amana RanARG7302 Gas Kitchen Range "wet stove burner working" Questions

wet knob sparked and popped and smelled like burning wires. Hi, If you have fuses on the stove have them checked and/or replaced with new ones. You may have shorted out something when you made it wet.

...stove does not light. When you turn on the right knobs the right burners ignite properly. The left burners will light with a match! There are times when front 2 burners will not light, but the back ...

...igniter problem,also i noticed my stove does that after i clean it,i was getting the igniters wet,had to just turn the burner on and light it with a lighter and leave it on till the igniter dried

...wet or damp, it can cause the clicking sound to continue. Try drying off the stove top and allowing it to sit for a few hours before trying again. Loose wiring: Check the wiring connections on the ...

...the igniter switches get wet from cleaning the stove and they dry out overnight and are fine. if it continues to ignite then one of the switches is stuck on usually from the shaft being

...stove.. out of 5 , 3 burners are working but there is a continuos clicking of the sparky thngs attached to each burner.... Sounds like water got into one of the burner switches. It may dry out and ...

...stove top the burners would not stop clicking. I had turned all the burners on after I cleaned the oven to check if they got wet and to make sure I put the knobs back on correctly. They continued to ...

...stove top...no more 'clicking' sounds ovens seem to work fine (the seem to use a 'glow plug' type of ignition). Could this be the spark module? How does one replace it? Is there a service manual with ...

...stove top one of the burners ignites/works just fine. The other 3 burners, when I turn it on "lite" gas starts flowing but will not ignite. The burners can be manually lit with a match. If your top ...

...stove after cleaning it. Obviously some part of the ignitor circuit got wet. All I did was blast the oven as hot as it would go to dry out the connection. After about 10 minutes the problem went away ...