Amana 22.6 cu. ft. Side-By-Side Refrigerator with FrontFill Ice and Water "fridge door shuting" Questions

...fridge is not blocked. if door was removed make sure light in fridge is shuting off if temp in fridge is in the 50 degree range your light switch is not being deactivated check spacers between door ...

fridge. In the past this would mean the door was left open / ajar. When I go and check the doors are not open. When I open the door to see inside I notice the lights and display is off. It is like the

...fridge door goes off after shuting door and will not go of util you push reset button have left door open and kept alarm button pressed in but alarm sill goes of have pulled switch in and out to make ...

...door Your fridge is telling you there is a fault, i'd say one of the 2 fans are not working. If everything is freezing in the bottom of the food compartment then the upper fan is faulty. You have to ...

...door for cleaning? Do I have to dismantle the whole thing or does it just snap off? was afraid of breaking it, if I tried to just snap it off. It does snap onto the lever and tilt down to remove. It ...

...shute can cause blockage, you have to turn of the fridge & leave the freezer door open long enough for it to clear, put your frozen meats in your sink & cover with a wet towel till job

...fridge off.thank you look inside the despenser in the door and make sure that the flapper that when you get ice through the door is sealing off the shute. if it is not sealing it off there is a kit ...

...Restart and give the machine 24 hours to recover. Common problem with Whirlpool products. P.S. Check to see if lights go out when closing fridge door. In fact this should be your first step. ...

...fridge. Do you have to remove the rubber seal round the door or what, any advice would be appreciated. Model no is FRSU20DAI 19.1CF It may be more serious, but first check for ice around the sides of ...

...shuting off running constant how to turn down knob will not work this would appear to be a thermistat control issue.make sure that the doors are closed tight and the seals are in good shape this will ...