Westinghouse LTV-27w6 27 in. LCD HDTV "monitor pc" Questions

monitor and PC to the VGA splitter. first make sure your tv monitor is supported by service input for PC unit. then prepare the accessories needed. the VGA splitter and VGA cable. sample image for VGA

PC and the monitor. Unplug all cables. Plug them back in. Then turn on your PC. If you see nothing during and after the POST, then it is likely you'll need a monitor. If you want to be 100% sure, take

...pc monitor rate for my philips tv model no 19pfl3504d/f7 You do not set the monitor refresh rate and the resolution at the monitor, it will be the source that you need to set it to, the monitor will ...

...pc monitor what do i do to use the tv as a pc monitor? I have done it many times before, but i just can't figure it out now. Please help me You'll need an adapter suited to the two ends of the the ...

...pc and monitor for at least 2 minute. How can I make my X263w power on again without turn off everything? Your PC monitor may be a CVT type. Anythingwill switch off when a monitor powers on. Its ...

...monitor of asembled PC.Problem comes when I switched it OFF, there is no display on monitor screen while my PC is ON. And when I start PC, at the time of chageover from TV to PC, only PC booting ...

...pc monitor using agp to hdmi cable Connect your tv to your PC . Turn your pc on and let the os (operating system) boot up. Then find the function key (f1-f12) usually has a rectangle symbol with a ...

...correct navtive resolution from your PC, the aspect ratio is not correct, the PC video output should be set to 1680x1050 @60Hz for this monitor. This monitor 16:10, not 16:9 like other 16:9

...monitor for the PC... What resolution is the screen (max) and what are you trying to put into it? If the video output of the PC is too much it won't 'see' it sometimes... try lowering the PC ...

...a monitor for my pc ive hooked up my pc to the tv via monitor cable but cannot get it to show my pc info on the screen check your resolution settings also set the hertz properly, it should be