Kenmore Oasis HE 27082 Top Load Washer "away lid lock" Questions

...away from one end of the magnetic reed relay do to corrosion. If you take apart the left lid lock the tabs holding the case halves together break off very easy so be careful on disassembly. I would ...

...drain, does it unlock the lid right away? There is a manual inside the cabinet that will tell you how to get into diagnostic mode to check for error codes and run the machine through it's ...

...when an item inside the washer prevents the lid from locking properly. Open the washer and readjust any items that may be hitting the lid. The error code should go away once you properly close the ...

...away from the lid) to about 1 second and then snap back. This seems to be opposite of what i would have imaged. Ran the board input test, and using the Normal key, I get Lid Position "CL". Does this ...

...lid and look in the space between the tub and the top in the rear right corner you should see a plastic "arm" sticking down, reach you hand back there and move it back away from the tub. This lever ...

...away how to fix it i don't know. my maytag 'neptune' wouldn't run. it turned out to be the door lock. your machine may not have a lid lock. look to see if there is a switch that tells when the lid is ...

...away Typical sequence: power on, lid locks, then unlocks, then locks again and should stay locked the 2nd time. If not, depending on model and design, actuator may need replacing that shifts ...

...lid lock away you only need the left lid lock for the machine to function as designed. Do you think you might have may have some drive system binding related to One-Way roller clutch bearing, Spinner ...

...will move the bowl away from the out of balance lever which is located under the lid to the back right. if it has got a lid lock light reply back for further help and to let me know how you got