Flapper Door Sensor I need a flapper door sensor and parts select.com is out of them I ordered 1, 4 months ago and they have now refunded my money they do not know if they will get any more in. can ...
...board or the small sensor by the flapper where the can comes out? If so where can i get these parts? I have cleaned the sensor on the door and it has fixed the problem, by wiping it off with a
when i press a button to vend, all for lights flash and nothing vends. why are the lights flashing and why won't it vend? The sensor board for the flapper door is bad.
flapper door sensor, just as chadschloss said. My Skybox is well again.Thanks,chadschloss. Wow! I've spent the last two years opening the door to get my drinks because it wouldn't dispense. The Maytag
...board or a transformer. I had the same problem and it turned out to be two parts. The flapper door sensor was bad, and the transformer was bad. You can get both pretty cheap from
...flapper door is,you can access it when the door is open.That is what tells the main control that the can has fallen down through the door and the door has closed. on the inside just right of the door ...
...to replace a sensor wire in the door, condensation had caused some rust on it. Al Had the same problem. Trim the seal on the back of the flapper door to get ti close fully and that problem went
flapper door frame.Take 2 black screws out to get to the sensor.Moisture builds up on it and corrodes it.Clean it with alcohol,replace it and try it,this is just an easy trouble shoot it worked for me
...door, there you will need to unplug the flapper sensor from the main board just follow the cable and youll find the plug, once you have unplugged the plug continue by removing the complete sensor and ...
349 questions posted
Usually answered in minutes!
2,522 Questions
209 Questions
172 Questions
114 Questions
96 Questions