VPI/VCI? If not, you need the correct VPI/VCI for your new ISP. Read the FAQ at DSL Reports on the 5260 and changing the VPI/VCI using EnterNet 300 1.5b or EnterNet 300 1.5c. http://www.dslreports.com
what is the VPI/VCI that i need to put ? These are the setting's that you will get from your internet service provider(ISP). ZyXEL Modem's default value for VPI =0 and for VCI=35.
...VPI = 0, VCI = 38 Encapsulation = VC-MUX , your username is usually your phone number followed by @talktalk.co.uk or @talktalk.net & your password in the password box (these should be on the letter ...
...VPI/VCI to 0/32 then the modem should work.'' Can you tell me if the modem will work? Thanks it will work if the subscription would also be an adsl line. but you need to know the new providers ...
...vpi and vci settings on windows vista for my dlink dsl-200 modem Huh?! You just go to all programs/dlink then click on configure. Do not use the dsl-200 modem with vista, I have never had so many ...
...vci/vpi and i dont know the the encapsulation for my isp. anyone know where i can find this? Sir, U can login ur ISP u can find. go to browser type your IP address for ex. http://192.152.185.1 and ...
...it with them. Normally, internet connections make use of vpi as 8 and vci at 35 for ciruit identifier. Try that. You can change the settings of the modem by pulling its interface. Hope that
...vci = 0 and vpi = 35 5. if u choose bridge mode then create a dial up broadband connection from new connection wizard 6. give the port settings over there in modem and use the same ports in your ...
Question about Computers & Internet
VPI/VCI with the Tiscali people. Reply back if any issues. change paswort on thomson speedtouch i think i had the same problem, if you use the i.p gateway for the modem which is 192.168.1.254 and work
152 questions posted
Usually answered in minutes!
72 Questions
34 Questions
35 Questions
23 Questions
21 Questions
