Polaroid FLM-2632 Television "vhf reception" Questions

...on the UHF/VHF band and run a coaxial cable from the antenna to the TV and plug in the "Belling-Lee" connector into the "Antenna" socket at rear of unit.. This should enable reception via "Normal

how do i set the 2632 from cable to uhf/vhf antanna Have a good antana like a roof or a HD antana plug into the ANT tv hole.Tv remote push the tv menu.Goto SETUP go down to CH.push and pick AIR not ...

...From that point I moved my VHF dipoles until I had located the correct position for reception. A little labor intensive, but I was fortunate to have another antenna that was receiving channel

...i have that works great, 150MILES OUTDOOR TV ANTENNA 360 MOTOR AMPLIFIED HDTV HIGH GAIN 36dB UHF ...

...reception on my samsung LE40R8 tv in Tasmania See this link: http://en.wikipedia.org/wiki/TDT_%28TV_station%29 Tasmanian Digital Television (TDT, callsign TDT-11) is a digital television station in ...

reception put up a mast on your house and hook up a UHF / VHF antenna. You may need to put on a rotor to point the antenna to the source of the signal. Or if you know where your source of the signal /

...reception area (this info should be in your owners manual). If scanning doesn't find any signals, you might have to add a VHF/UHF line amplifier(s) between your antenna and the TV set or improve your ...

...reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. the exact type and positioning of the aerial will depend upon your particular area your dealer ...

...VHF signal had more of an ability to travel around trees and mountains and, therefore, was received easily by television antennas. However, after the DTV transition, many stations moved to the UHF ...

...well and you'll need pre-amplification as well. I got $21 RCA pre-amp from Amazon that solved a lot of my reception problems from the Antennas and I have good ones (VHF & UHF both) to start