Question about Whirlpool duet Washing Machines
...washing machine plumbing requirement What is required to install a fully working automatic washing machine, will ordinary water faucet do, how will the washing machine draw water? What is needed, do ...
...washing heavy soils in cold or hard water. Is your water colder than 60°F (15.6°C)? Wash water colder than 60°F (15.6°C) may not completely dissolve the detergent. Use hot or ...
...washing machine... you will be able to see the screens...if they are stopped up you can remove them with a small screw driver and clean them and reinstall them. Hook up your hoses and turn on your ...
Question about Whirlpool duet Washing Machines
...HOT or COLD - if not, label them BEFORE removing.) 6. Connect water supply lines making sure they are not crossed. If you have the original manufacturer's hoses, they will be marked RED for hot and ...
Question about Whirlpool duet Washing Machines
washing habits. Jeff is "right on the money" when he stated water temperature is important. It's fine to use mainly cold water but it makes preventive maintenance very important. A hot soak or wash as
machine. Even when no cycle running Hello, welcome to FixYa. Based on your description...you likely have a faulty inlet water valve, thus allowing water to enter even when idle. The valve # is 8182862
...hot & cold fill hoses going to the washer. 2) remove the three screws along the back of the top panel and then slide the top panel back slightly and pull up. The panel should lift away. 3) in the ...
Question about Whirlpool duet Washing Machines
...hot & cold fill hoses going to the washer. 2) remove the three screws along the back of the top panel and then slide the top panel back slightly and pull up. The panel should lift away. 3) in the ...
...hot & cold fill hoses going to the washer. 2) remove the three screws along the back of the top panel and then slide the top panel back slightly and pull up. The panel should lift away. 3) in the ...
Question about Whirlpool duet Washing Machines
...hot & cold fill hoses going to the washer. 2) remove the three screws along the back of the top panel and then slide the top panel back slightly and pull up. The panel should lift away. 3) in the ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions