Whirlpool Duet GHW9150P Front Load Washer "quits half" Questions

where is the reset button My suggestion is to unplug the machine for about 30 seconds. I've fond this can solve quite a few problems. As a simpler way of doing the same thing go to your fuse box ...

my washer is really loud and is bouncing around the kitchen we have just put new brushes in it as it stopped spinning but thats sorted now its got a mind of its own Hiya, Jumping washing machines are ...

Whirlpool duet front lading washer, GHW9150PW4 Our washer is making a loud noise and jumping all around when spinning. It has also been leaking. Is it going out or can it be fixed? It is 7 years old. ...

fabric softener will not dispense Most of the time this is dispenser housing issue ,remove the entire dispenser tray frrom washer ,do this by pushing down on tab when pulled out all the way.. Look ...

We have a Whirlpool Cabrio washer - model #WTW6400SW2. It quit working in the middle of a wash cycle and showed the ld error code. The tub was still about half full of water. Unplugged the machine to ...

Sport_Duet F-28, fails on spin We loved our new washer for 6 months, then it died. 5 tech visits later and we still can't use our washer. No luck yet trying to get replacement washer, even if we pay ...

Knocking Whirlpool Duet I read your posting on June 28 with the same title "knocking."--I have the exact same problem. I have not done anything yet, as I first wanted to ask you if there would be any ...

My hot point wma bearing is gone. Where to buy spare ones. Hotpoint wma33. Bearing needs replacement. Depends where you live here in England I buy from hotpoint.however its quite a big job to do also ...

agitator only works on bottom half. can I repair agitator only works on bottom half. can I repair this myself if the clothes mover section on top quit,remove the detergent cup and with a 9/16" socket ...

Not quite enough water getting into the machine. Some washes coming out with dry patches on the laundry hi when doing wash are you sure wash load button is set for full load and not half load ? as ...