...printhead by making strange noise and then error message appears ERROR/ HEAD LIFT ERROR This machine is one year old. If you replaced the o-ring on the headlift assembly and that did not solve the ...
Question about Fargo DTC Office Equipment & Supplies
dtc525 printhead not printing. no error 1, how do you know is the print head that is not doing the job 2, did you check if the print head is slack or a it lose ?
Question about Fargo DTC Office Equipment & Supplies
error ...so ..how can I solve this problem ? I had the same problem with my fargo dtc 550. I changed the "O" Ring rubber attached to the printhead and that solved the problem. No more head lift errors
Question about Fargo DTC Office Equipment & Supplies
...error like "Panel Searching" that means " the ribbon sensor can't read the ribbon panels normally). 2- Clean the "card path" (the feed and platen rollers) for dust dirt and debris using the ...
Question about Fargo DTC Office Equipment & Supplies
...Error: "Printhead Failure" (105-3802) - Kodak support.en.kodak.com/.../error%3A-printhead-failure-(105-3802) KodakAug 25, 2010 - How do I resolve the error message "Printhead Failure" (error code ...
...Printhead Error Did you ever resolve that issue? I realize it was from last year but my machine is giving me fits now. Thanks. 93x Printhead Error Each printhead error has its own error code number. ...
...Printhead error Hey, I work at a high school and I've got a perfectly good Infroprint 1352 sitting around, but can't use it anywhere because whenever I turn it on or try and plug into the network it ...
...Printhead Error message, make sure it is plugged straight tothe wall and not through a surge device or power strip. Power strips anduninterrupted power supplies can cause a low amperage problem in ...
...printhead error,check connections at both ends of cable for corosion or oxidation,reconnect them.Also can be system board error.You can check the operation of the printhead shutter and clean the ...
Error message re printhead. First use Printhead & ink installed, message states "printhead is missing not installed correctly ..." How do you take the printhead out? To resolve the error condition: ...
120 questions posted
Usually answered in minutes!
40 Questions
11 Questions
18 Questions
17 Questions
25 Questions