Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor "shut down" Questions

...comes on perfectly (full resolution, brightness etc) for about 1-2 seconds and then the screen shuts off. It's just the screen itself that shuts off off, the row of LEDs stays on, so it's still ...

...shut down on their own. Two will not turn on at all (no response from power button) and the third will work for a short time then the top of the screen gets brighter then shuts off. It is possible to ...

shut down wont power up. My friend gave me a Dell UltraSharp 2005FPW who said it was bad. Was working fine and shut off and would not power up again. It sat in his garage for a couple months before he

...shut the system down totally. I worked on this for an hour with no luck. Any suggestions beides the garbage can? Thanks If you are a tech. Check the voltages going to the Logic Board, if one is ...

...Your question is vague. However, if you need to reset any monitor generally that can be done by shutting down any computer it is connected to, then removing all power for more than 60secs. On ...

...shut down and crash and called for support which didn't help. Reconnected a few things and now it's back up however there's a green 1 light that's ilt on the bottom panel of the monitor next to the ...

monitor shuts off but green light stays on I have had the same problem as others seem to have had with the dell flat panel. After leaving the screen on for some time, the monitor brightens for a ...

...shut-down" mode. Read my fixya profile for a while, then do the "flashlight" test. Then go watch some DIY repair video clips at YOUTUBE to see if you might try that avenue of approach to fixing your ...

...inverter will shut down if it detects this. You will need to open up your monitor and you will be able to see if any capacitors have "blown" but failure of a lot of components will cause this

...is bad. Your description is of very classic symptom for the backlight. When it warms up enough it shuts down. You can either replace the LCD assembly or monitor or try replacing the backlight bulb ...