...IC change 7805 ic(5 volt regulator) near microcontroler ic. some time regulator ic 7805 bad or 8pin memory ic bad replace it i think that it is good solution for this problem ganesh g from ...
...change memory ic that is placed in command section.you can idenify command section by front panel keyboard.where the front panel keyboard wire/pot placed.you can find to ic in this section the small ...
5 volt not raning?do not on power suplly? change 5v ic s78dl05 small transistor like near memory ic
Monitor faulty OSD main controls lock keep on appear on screen. Any ideas to solve. change the menu buttons, if problem not solve change memory ic of monitor kit
memory ic and command ic for fault.And check all components that is placed near front panel keyboard's buttons.normaly it is the problem of command ic and memory ic. Hope this be of initial help/idea.
...Memory IC .if Ic is ok Then Check OSD Software progarme this Program is crupt. So Contact Ur nerest Service Center Of Preview or Contact Service Engg Of Prewew Bocoz this problem easly Solve by ...
in. what is the meaning of factory burn in.. because the mesage appeared on my monitor last week until now... is there any problem with my monitor... but mine is xp change memory ic in command section
phillips monitor 105s,width is problem while pressing width button width remain same no increasae neither decrease change 8pin memory ic of monitor .
...with my SyncMaster 910MP The colors have faded and the monitor turns "off", but the power light remains on. I have to unplug the monitor and the plug it back in again to make it work. change memory ...
CONTROL LOCK UNLOCKED ALWAYS APPEARS ON SCREEN.DISAPPEARS ON PRESSING MENU check 5v regulater LM7805.and change it.. check your memory IC and change
332 questions posted
Usually answered in minutes!
15 Questions
11 Questions
5 Questions
4 Questions
3 Questions