Canon Optura 60 Mini DV Digital Camcorder "fix battery door power" Questions

...battery, and have the camera off, but make sure the power cord is connected. Open the door until the tape slides out further than at other times. (Note: It intermittently slides out further when the ...

...won't "latch" closed. Is this something I can fix myself? The latch is reset by battery power - try charging the battery and reinstalling it. If that doesn't do it, it'll have to go to a repair

...battery, no help, tried sharply hitting the door a few times which worked for some people, but not me, took the casing off the door and tried to find the release mechanism and couldn't, it coses to ...

...battery, a simple and cheap fix as these wristwatch type batteries are widely available. This fix applies to all the Canon MV series cameras, although the location of the battery might differ from ...

...door won't close where the tape goes in. please help me i need the driver Have you tried buying a new battery? Remember that rechargable batteries must be charged a min. of 24 hours but I usually ...

door. Is there a manual way that I can get my tape out and is there a way to fix this problem? Thanks TAKE IT TO NEAREST SERVICE CENTER TO FIX THE PROBLEM. NO WAY TO REMOVE THE TAPE MANUALY tape stuke

...fix your problem please follow the below steps: 1. unplug camcorder AC cord 2. remove fat battery from back of camcorder 3. remove slim battery from under the LCD (it's the size of a nickle coin) 4. ...

...fix it: What I did was to first remove the battery and AC power to "reset" the camera. I then put the battery back in place and WHILE HOLDING THE CAMERA IN THE UPRIGHT (AS IF USING THE CAMERA FOR ...

...battery, and turned it back on and it did not help any. Any ideas of what I need to check and how to check it or how I can fix this myself quickly since I am needing it TOMORROW morning? Thanks! ...

...battery also and still no power. I read over the instruction booket to see if there was a reset button or perhaps a fuse that might need to be changed but could not find any info. We called Sharp ...