HP DesignJet 10ps InkJet Printer "printhead" Questions

Print head printhead replace option again and agian diffrent printhead The carriage does not accept one or more of the printheads. Typical causes are dirty contacts on the printheads or carriage, ...

printhead replacement every week or 2 this hp 1050+ plotter says to replace printheads. the user has replaced them each time and then a couple weeks later it calls for new printheads again, so far ...

HP designjet 1055cm plus: Installed new toner, printheads and printhead cleaner packs and the black one is failing? Said, alignment so reinstalled. Still failing. Help! hello, Try to reconfigure your ...

...06030800000008. I would like to know what the problem is and the solution, please. Thank you. Hi, Printhead failure this is. Turn the printer on. Following initialization, use the Down Arrow key to ...

will not print any color cartridges were 5 years old but read full except black, replaced all cart. printheads are original black works fine, replaced original #11 with new #10 (larger) very low usage

HP5500 UV...after paper jam I have a replace lt cyan printhead message and recover black printhead. Re-booting doesn't clear the replace or recover notes. Can I just remove the light cyan ...

Black printhead out of line. Prints staggered lines Ok my plotter was printing fading black lines, I messed with the printhead and screwed it up it started leaking ink so I knew it was shot. I ordered

The HP Designjet 1055cm has 4 ink cartridges, 4 printheads and 4 printhead cleaners. My question is: Will the plotter still work properly if I just install the black ink cartridge along with the ...

...Sensor does not switch to less than half even though ink has been
consumed.
?? x = 0: Printhead Number 1 (Black).
?? x = 1: Printhead Number 2 (Light Magenta).
?? x = 2: ...

...very simple procedure. Advance to the print head menu on the printers screen and scroll to replace printheads and press enter. The machine will move the print head carriage into a position on the ...